| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001KUC1 |
| Model Year Start: 2020 | Model: Camry | Prod Date Range: [09/2019 - ] |
| Title: SEAT: REAR SEAT ASSEMBLY (for Fold Down Seat Type): DISASSEMBLY; 2020 - 2024 MY Camry [09/2019 - ] | ||
DISASSEMBLY
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. REMOVE REAR SEAT SHOULDER BELT GUIDE LH (for LH Side)
|
(a) Remove the 2 screws. |
|
(b) Disengage the guide to remove the rear seat shoulder belt guide LH.
2. REMOVE REAR SIDE SEATBACK COVER WITH PAD (for LH Side)
|
(a) Remove the 2 nuts. |
|
|
(b) Disengage the 15 hooks. |
|
(c) Remove the rear side seatback cover with pad from the rear side seatback frame sub-assembly LH as shown in the illustration.
|
Remove in this Direction |
3. REMOVE REAR SEAT AIRBAG ASSEMBLY LH (for LH Side)
Click here
![2020 MY Camry [09/2019 - 10/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: REAR SEAT SIDE AIRBAG ASSEMBLY (for Fold Down Seat Type): REMOVAL+](/t3Portal/stylegraphics/info.gif)
4. REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH (for LH Side)
(a) Remove the rear side seatback cover sub-assembly LH from the rear side seatback pad LH.
5. REMOVE REAR SEAT SHOULDER BELT GUIDE RH (for RH Side)
HINT:
Use the same procedure as for the LH side.
6. REMOVE REAR SIDE SEATBACK COVER WITH PAD (for RH Side)
HINT:
Use the same procedure as for the LH side.
7. REMOVE REAR SEAT AIRBAG ASSEMBLY RH (for RH Side)
HINT:
Use the same procedure as for the LH side.
8. REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH (for RH Side)
HINT:
Use the same procedure as for the LH side.
9. REMOVE REAR SEAT HEADREST COVER
HINT:
Use the same procedure for the LH side and RH side.
(a) w/ Removable Headrest:
|
(1) Disengage the hook. |
|
(2) Remove the rear seat headrest cover from the rear seat headrest pad sub-assembly.
10. REMOVE REAR SEATBACK UPPER LOCK BEZEL (for LH Side)
|
(a) Disengage the 4 claws to remove the rear seatback upper lock bezel. |
|
11. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)
|
(a) Open the 2 fasteners as shown in the illustration. |
|
|
(b) Disengage the 2 hooks. |
|
(c) Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH as shown in the illustration.
|
|
Remove in this Direction |
12. REMOVE REAR SEAT HEADREST SUPPORT (for LH Side)
(a) w/ Removable Headrest:
(1) Disengage the 2 claws and remove the 2 rear seat headrest supports as shown in the illustration.
|
|
Remove in this Direction |
13. REMOVE SEPARATE TYPE REAR SEATBACK COVER (for LH Side)
(a) w/o Removable Headrest:
(1) Remove the 8 hog rings.
|
Fastener |
(2) Disengage the fastener and remove the separate type rear seatback cover from the separate type rear seatback pad.
(b) w/ Removable Headrest:
(1) Remove the 6 hog rings.
|
|
Fastener |
(2) Disengage the fastener and remove the separate type rear seatback cover from the separate type rear seatback pad.
14. REMOVE REAR SEATBACK HINGE COVER (for RH Side)
(a) Remove the bolt and rear seatback hinge cover as shown in the illustration.
|
|
Remove in this Direction |
15. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side)
|
(a) Remove the bush. |
|
(b) Disengage the pin and remove the rear seat center armrest assembly as shown in the illustration.
|
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
(c) Remove the bush as shown in the illustration.
|
|
Remove in this Direction |
16. REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE (for RH Side)
|
(a) Remove the 2 screws. |
|
(b) Disengage the guide to remove the rear seat center shoulder belt guide.
17. REMOVE REAR SEATBACK UPPER LOCK BEZEL (for RH Side)
|
(a) Disengage the 4 claws to remove the rear seatback upper lock bezel. |
|
18. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)
|
(a) Open the 2 fasteners as shown in the illustration. |
|
|
(b) Disengage the 4 hooks. |
|
(c) Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly RH as shown in the illustration.
|
|
Remove in this Direction |
19. REMOVE REAR SEAT HEADREST SUPPORT (for RH Side)
(a) w/ Removable Headrest:
(1) Disengage the 2 claws and remove the 2 rear seat headrest supports as shown in the illustration.
|
|
Remove in this Direction |
20. REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side)
(a) w/o Removable Headrest:
|
(1) Disengage the 4 guides. |
|
(2) Remove the 8 hog rings.
|
|
Fastener |
(3) Disengage the fastener to remove the separate type rear seatback cover from the separate type rear seatback pad.
(b) w/ Removable Headrest:
|
(1) Disengage the 4 guides. |
|
(2) Remove the 6 hog rings.
|
|
Fastener |
(3) Disengage the fastener and remove the separate type rear seatback cover from the separate type rear seatback pad.
21. REMOVE CHILD RESTRAINT SEAT COVER
(a) Disengage the 2 claws and 2 guides to remove the child restraint seat cover as shown in the illustration.
|
|
Remove in this Direction |
HINT:
Use the same procedure for all of the child restraint seat covers.
22. REMOVE CHILD RESTRAINT SEAT BASE COVER
(a) Remove the screw.
|
|
Remove in this Direction |
(b) Disengage the claw and guide to remove the child restraint seat base cover as shown in the illustration.
HINT:
Use the same procedure for all of the child restraint seat base covers.
23. REMOVE BENCH TYPE REAR SEAT CUSHION COVER
(a) Remove the 21 hog rings.
(b) Disengage the 4 fasteners.
(c) Remove the 22 hog rings.
|
|
Fastener |
- |
- |
(d) Disengage the 2 fasteners to remove the bench type rear seat cushion cover from the rear seat cushion pad sub-assembly.
|
|