Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001KFF3
Model Year Start: 2020 Model: Camry Prod Date Range: [09/2019 -           ]
Title: CELLULAR COMMUNICATION: BACK-UP BATTERY: REMOVAL; 2020 - 2024 MY Camry [09/2019 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during back-up battery removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

back-up battery

Perform the reset back-up battery condition

Safety connect system

2020 - 2024 MY Camry [09/2019 -        ]; CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: INITIALIZATION

PROCEDURE

1. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET

Click here 2020 MY Camry [09/2019 - 10/2020]; CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL 2021 - 2024 MY Camry [10/2020 -        ]; CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL

2. REMOVE BACK-UP BATTERY

(a) Disengage the 3 claws and 2 guides as shown in the illustration to remove the transceiver cover.

Remove in this Direction (1)

Remove in this Direction (2)

(b) Disconnect the connector.

Remove in this Direction

(c) Remove the back-up battery as shown in the illustration.