Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001JYXN
Model Year Start: 2020 Model: Camry Prod Date Range: [09/2019 - 10/2020]
Title: SEAT: LUMBAR SUPPORT ADJUSTER ASSEMBLY (for TMMK Made Power Seat): REMOVAL; 2020 MY Camry [09/2019 - 10/2020]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during lumbar support adjuster assembly LH removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link
*: When performing learning using the Techstream.

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM: CALIBRATION

Disconnect cable from negative battery terminal

Perform steering sensor zero point calibration

Lane departure alert system (w/ Steering Control)

2018 - 2020 MY Camry [03/2017 - 10/2020]; PRE-COLLISION: PRE-COLLISION SYSTEM: INITIALIZATION

Pre-collision system

Intelligent clearance sonar system*

Memorize steering angle neutral point

Parking assist monitor system

2018 - 2024 MY Camry [03/2017 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: INITIALIZATION

Panoramic view monitor system

2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: INITIALIZATION

CAUTION:

  • Be sure to read Precaution thoroughly before servicing.

    Click here 2020 MY Camry [09/2019 - 03/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: PRECAUTION 2020 MY Camry [03/2020 - 10/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: PRECAUTION

  • Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY LH

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; SEAT: FRONT SEAT ASSEMBLY (for TMMK Made Power Seat): REMOVAL

2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

Click here 2020 - 2024 MY Camry [09/2019 -        ]; SEAT: FRONT SEAT ASSEMBLY (for TMMK Made Power Seat): DISASSEMBLY+

3. REMOVE FRONT SEAT FRONT CUSHION SHIELD LH

Click here 2020 - 2024 MY Camry [09/2019 -        ]; SEAT: FRONT SEAT ASSEMBLY (for TMMK Made Power Seat): DISASSEMBLY+

4. REMOVE FRONT SEAT CUSHION SHIELD LH

Click here 2020 - 2024 MY Camry [09/2019 -        ]; SEAT: FRONT SEAT ASSEMBLY (for TMMK Made Power Seat): DISASSEMBLY+

5. REMOVE FRONT SEAT INNER CUSHION SHIELD LH

Click here 2020 - 2024 MY Camry [09/2019 -        ]; SEAT: FRONT SEAT ASSEMBLY (for TMMK Made Power Seat): DISASSEMBLY+

6. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY

Click here 2020 - 2024 MY Camry [09/2019 -        ]; SEAT: FRONT SEAT ASSEMBLY (for TMMK Made Power Seat): DISASSEMBLY+

7. REMOVE FRONT SEAT HEADREST SUPPORT

Click here 2020 - 2024 MY Camry [09/2019 -        ]; SEAT: FRONT SEAT ASSEMBLY (for TMMK Made Power Seat): DISASSEMBLY+

8. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

Click here 2020 - 2024 MY Camry [09/2019 -        ]; SEAT: FRONT SEAT ASSEMBLY (for TMMK Made Power Seat): DISASSEMBLY+

9. REMOVE SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)

(a) Disengage the wire harness clamp and disconnect the connector.

HINT:

Disengage the wire harness clamp first.

(b) Disengage the 2 claws and 3 hooks to remove the seatback climate control blower.

HINT:

Disengage the 2 claws first.

10. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH

(a) w/o Climate Control Seat System:

(1) Disengage the clamp and disconnect the connector.

HINT:

Disengage the clamp first.

(2) Disengage the 8 hooks to remove the lumbar support adjuster assembly LH.

(b) w/ Climate Control Seat System:

(1) Disengage the clamp and disconnect the connector.

HINT:

Disengage the clamp first.

(2) Disengage the 2 claws.

(3) Disengage the 2 guides to remove the lumbar support adjuster assembly LH as shown in the illustration.

Remove in this Direction