- Ignition switch ON
- Steering pad switch assembly operated, "TPWS" selected on the multi-information display and "OK" switch (steering pad switch assembly) pressed and held → "OK" switch (steering pad switch assembly) off
| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001DU9U |
| Model Year Start: 2019 | Model: Camry | Prod Date Range: [08/2018 - 03/2020] |
| Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: TERMINALS OF ECU; 2019 - 2020 MY Camry [08/2018 - 03/2020] | ||
TERMINALS OF ECU
COMBINATION METER ASSEMBLY
(a) Measure the voltage and resistance and check for pulses according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Signal Input/Output |
Condition |
Specified Condition |
|---|---|---|---|---|
|
K21-1 (ILL-) - Body ground |
LA-L - Body ground |
Output |
Headlight dimmer switch off → Headlight dimmer switch in tail or head position |
Below 1 V → Pulse generation |
|
K21-2 (EP) - Body ground |
W-B - Body ground |
- |
Always |
Below 1 Ω |
|
K21-4 (INT) - Body ground |
L - Body ground |
Output |
|
Below 1.5 V → 8 to 15 V |
|
K21-5 (SI) - Body ground |
W - Body ground |
Input |
Ignition switch ON, wheel being rotated |
Pulse generation (See waveform 1) |
|
K21-6 (+S) - Body ground |
L - Body ground |
Output |
Ignition switch ON, wheel being rotated |
Pulse generation (See waveform 1) |
|
K21-7 (VCM) - Body ground |
BE - Body ground |
Input |
Engine started, vacuum warning switch off (brake warning light off) → Vacuum warning switch on (brake warning light on) |
11 to 14 V → Below 1 V |
|
K21-9 (S)*1 - Body ground |
LA-R - Body ground |
Input |
Engine not started → Engine started |
Below 1 V → 11 to 14 V |
|
K21-12 (SW) - Body ground |
G - Body ground |
Input |
Ignition switch ON, brake fluid level not low (brake warning light off) → Brake fluid level low (brake warning light on) |
11 to 14 V → Below 1 V |
|
K21-14 (FR) - K21-33 (FE) |
LG - BE |
Input |
Ignition switch ON, fuel level full → Fuel level low (fuel level warning light on) |
Pulse generation (See waveform 2) |
|
K21-15 (FV) - Body ground |
GR - Body ground |
Input |
Ignition switch ON |
Pulse generation (See waveform 3) |
|
K21-17 (WLVL) - Body ground |
LG - Body ground |
Input |
Ignition switch ON, washer fluid level not low → Washer fluid level low |
11 to 14 V → Below 1 V |
|
K21-18 (RLMT) -Body ground |
BE - Body ground |
Output |
Ignition switch ON, rear seat belt warning light LH off → Rear seat belt warning light LH on |
11 to 14 V → Below 1 V |
|
K21-19 (RCMT) -Body ground |
R - Body ground |
Output |
Ignition switch ON, rear seat belt warning light center off → Rear seat belt warning light center on |
11 to 14 V → Below 1 V |
|
K21-20 (RRMT) -Body ground |
G - Body ground |
Output |
Ignition switch ON, rear seat belt warning light RH off → Rear seat belt warning light RH on |
11 to 14 V → Below 1 V |
|
K21-21 (ES) - Body ground |
W-B - Body ground |
- |
Always |
Below 1 Ω |
|
K21-24 (RLSB) - Body ground |
SB - Body ground |
Input |
Ignition switch ON, rear seat belt LH unfastened → Fastened |
Below 1 V → 11 to 14 V |
|
K21-25 (RCSB) - Body ground |
B - Body ground |
Input |
Ignition switch ON, rear seat belt center unfastened → Fastened |
Below 1 V → 11 to 14 V |
|
K21-26 (RRSB) - Body ground |
LG - Body ground |
Input |
Ignition switch ON, rear seat belt RH unfastened → Fastened |
Below 1 V → 11 to 14 V |
|
K21-27 (OILW) - Body ground |
W - Body ground |
Input |
Ignition switch ON, engine oil level not low → Engine oil level low |
Below 1 V → 11 to 14 V |
|
K21-28 (MSM+) - Body ground |
GR - Body ground |
Input |
Ignition switch ON, up, down, right and left switches on steering pad switch assembly not pushed |
4.8 to 5.2 V |
|
K21-29 (MSTI) - Body ground |
R - Body ground |
Input |
Ignition switch ON, OK and back switches on steering pad switch assembly not pushed |
4.8 to 5.2 V |
|
K21-31 (CANL) |
W |
Input/Output |
- |
- |
|
K21-32 (CANH) |
B |
Input/Output |
- |
- |
|
K21-36 (TX+)*2 |
G |
Input/Output |
- |
- |
|
K21-37 (TX-)*2 |
W |
Input/Output |
- |
- |
|
K21-39 (IG+) - Body ground |
LA-GR - Body ground |
Input |
Ignition switch off → Ignition switch ON |
Below 1 V → 11 to 14 V |
|
K21-40 (B) - Body ground |
LA-B - Body ground |
Input |
Always |
11 to 14 V |
|
K20-1 (ODO) - Body ground |
LA-L - Body ground |
Input |
Ignition switch ON, ODO/TRIP switch (trip switch) not pushed |
4.8 to 5.2 V |
|
K20-2 (TR) - Body ground |
L - Body ground |
Input |
Ignition switch ON, light control rheostat up switch (trip switch) and light control rheostat down switch (trip switch) not pushed |
4.8 to 5.2 V |
|
K20-3 (HAZ) - Body ground |
LA-R - Body ground |
Input |
Hazard warning signal switch off → Hazard warning signal switch pushed |
11 to 14 V → Below 1 V |
|
K20-5 (SW3) - Body ground |
LA-B - Body ground |
- |
Always |
Below 1 Ω |
|
K20-7 (LR) - Body ground |
LA-G - Body ground |
Output |
Ignition switch ON, RH turn indicator light off → RH turn indicator light blinking |
Below 1 V → 11 to 14 V ←→ Below 1 V |
|
K20-8 (B) - Body ground |
LA-B - Body ground |
Input |
Always |
11 to 14 V |
|
K20-10 (TRNL) - Body ground |
BE - Body ground |
Output |
Ignition switch ON, LH turn indicator light off → LH turn indicator light blinking |
Below 1 V → 11 to 14 V ←→ Below 1 V |
|
K20-11 (LL) - Body ground |
LA-LG - Body ground |
Output |
Ignition switch ON, LH turn indicator light off → LH turn indicator light blinking |
Below 1 V → 11 to 14 V ←→ Below 1 V |
|
K20-13 (TRNR) - Body ground |
BE - Body ground |
Output |
Ignition switch ON, RH turn indicator light off → RH turn indicator light blinking |
Below 1 V → 11 to 14 V ←→ Below 1 V |
- *1: for 2GR-FKS
- *2: for 8 Inch Display Type Radio and Display Receiver Assembly
-
Waveform 1:
Item
Condition
Tester connection
- K21-5 (SI) - Body ground
- K21-6 (+S) - Body ground
Tool setting
5 V/DIV., 20 ms./DIV.
Condition
Ignition switch ON, wheel being rotated
HINT:
When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.
-
Waveform 2:
Item
Condition
Tester connection
K21-14 (FR) - K21-33 (FE)
Tool setting
2.5 V/DIV., 20 ms./DIV.
Condition
Ignition switch ON, fuel level full → fuel level low (fuel level warning light on)
HINT:
- (A) varies depending on the fuel level.
- Ignition switch ON, fuel level full (4.0 to 4.6 V) → Fuel level low (fuel level warning light on) (0.3 to 1.5 V)
-
Waveform 3:
Item
Condition
Tester connection
K21-15 (FV) - Body ground
Tool setting
2.5 V/DIV., 20 ms./DIV.
Condition
Ignition switch ON
HINT:
Ignition switch ON (4.5 to 5.5 V)
|
|