Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM10000000166P3
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 - 10/2020]
Title: WIPER / WASHER: WASHER LEVEL WARNING SWITCH: REMOVAL; 2018 - 2020 MY Camry [06/2017 - 10/2020]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during level warning switch assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Front bumper assembly (w/ Panoramic view monitor system)

Front television camera view adjustment

Panoramic view monitor system

2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: INITIALIZATION for Initialization

2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: CALIBRATION for Calibration

PROCEDURE

1. REMOVE FRONT BUMPER ASSEMBLY

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL

2. DRAIN WASHER FLUID

Click here 2018 - 2024 MY Camry [03/2017 -        ]; WIPER / WASHER: WASHER MOTOR: REMOVAL+

3. REMOVE LEVEL WARNING SWITCH ASSEMBLY

(a) Disconnect the connector.

Remove in this Direction

(b) Remove the level warning switch assembly as shown in the illustration.