Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000015XX4
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 - 09/2019]
Title: A25A-FKS (ENGINE MECHANICAL): ENGINE: ON-VEHICLE INSPECTION; 2018 - 2019 MY Camry [06/2017 - 09/2019]

ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

To prevent injury due to contact with an operating V-ribbed belt or cooling fan, keep your hands and clothing away from the V-ribbed belt and cooling fan when working in the engine compartment with the engine running or the engine switch on (IG).

PROCEDURE

1. INSPECT ENGINE COOLANT

Click here 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (COOLING): COOLING SYSTEM: ON-VEHICLE INSPECTION 2019 - 2024 MY Camry [08/2018 -        ]; A25A-FKS (COOLING): COOLING SYSTEM: ON-VEHICLE INSPECTION

2. INSPECT ENGINE OIL

Click here 2018 - 2023 MY Camry [03/2017 - 08/2023]; A25A-FKS (LUBRICATION): LUBRICATION SYSTEM: ON-VEHICLE INSPECTION

3. INSPECT BATTERY CONDITION

Click here 2018 - 2024 MY Camry [03/2017 -        ]; A25A-FKS (BATTERY / CHARGING): CHARGING SYSTEM: ON-VEHICLE INSPECTION

4. INSPECT SPARK PLUG

Click here 2018 - 2024 MY Camry [03/2017 -        ]; A25A-FKS (ENGINE CONTROL): IGNITION SYSTEM: ON-VEHICLE INSPECTION

5. INSPECT AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

(a) Remove the air cleaner filter element sub-assembly.

(b) Visually check that the air cleaner filter element sub-assembly is not damaged or excessively oily. If necessary, replace the air cleaner filter element sub-assembly.

HINT:

  • If there is any dirt or clogs in the air cleaner filter element sub-assembly, clean it with compressed air.
  • If any dirt or clogs remain even after cleaning the air cleaner filter element sub-assembly with compressed air, replace it.

(c) Install the air cleaner filter element sub-assembly.

6. INSPECT V-RIBBED BELT

Click here 2018 - 2024 MY Camry [03/2017 -        ]; A25A-FKS (ENGINE MECHANICAL): DRIVE BELT: ON-VEHICLE INSPECTION+

7. INSPECT V-RIBBED BELT TENSIONER ASSEMBLY

(a) Remove the V-ribbed belt.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; A25A-FKS (ENGINE MECHANICAL): DRIVE BELT: REMOVAL

(b) Turn the V-ribbed belt tensioner assembly clockwise and counterclockwise and check that it turns smoothly and does not catch.

HINT:

If the V-ribbed belt tensioner assembly does not turn smoothly or catches, replace the V-ribbed belt tensioner assembly.

(c) Install the V-ribbed belt.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; A25A-FKS (ENGINE MECHANICAL): DRIVE BELT: INSTALLATION

8. INSPECT VALVE LASH ADJUSTER ASSEMBLY NOISE

(a) Rev up the engine several times. Check that the engine does not emit unusual noises.

(b) If unusual noises occur, warm up the engine and idle it for 30 minutes or more, then perform the inspection.

HINT:

If any defects or problems are found during the inspection, perform the valve lash adjuster assembly inspection.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; A25A-FKS (ENGINE MECHANICAL): ENGINE UNIT: INSPECTION+

9. INSPECT IGNITION TIMING

NOTICE:

  • Check the ignition timing with the cooling fan off.
  • Turn off all electrical systems and the A/C.
  • When checking the ignition timing, the transaxle should be in neutral or park.

(a) Warm up and stop the engine.

(b) When using the Techstream:

(1) Connect the Techstream to the DLC3.

(2) Start the engine and run it at idle.

(3) Turn the Techstream on.

(4) Enter the following menus: Powertrain / Engine / Data List / Ignition Timing Cylinder #1.

Powertrain > Engine > Data List

Tester Display

Ignition Timing Cylinder #1

Standard Ignition Timing:

0 to 15° BTDC at idle

(5) Enter the following menus: Powertrain / Engine / Active Test / Activate the TC Terminal / ON.

Powertrain > Engine > Active Test

Active Test Display

Activate the TC Terminal

Data List Display

Ignition Timing Cylinder #1

(6) Monitor Ignition Timing Cylinder #1 of the Data List.

Standard Ignition Timing:

8 to 12° BTDC at idle

(7) Enter the following menus: Powertrain / Engine / Active Test / Activate the TC Terminal / OFF.

(8) Check that the ignition timing advances immediately when the engine speed is increased.

(c) When not using the Techstream:

(1) Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

SST: 09843-18040

NOTICE:

Confirm the terminal numbers before connecting them. Connecting the wrong terminals may damage electrical components.

*a

DLC3

(2) Connect the clip of a timing light to the ignition coil wire for the No. 1 cylinder.

NOTICE:

Use a timing light that detects primary signals.

(3) Start the engine and run it at idle.

(4) Check the ignition timing at idle.

Standard Ignition Timing:

8 to 12° BTDC at idle

(5) Disconnect terminals 13 (TC) and 4 (CG) of the DLC3.

(6) Check the ignition timing at idle.

Standard Ignition Timing:

0 to 15° BTDC at idle

(7) Confirm that the ignition timing advances immediately when the engine speed is increased.

(8) Disconnect the clip of the timing light from the ignition coil wire for the No. 1 cylinder.

10. INSPECT ENGINE IDLE SPEED

NOTICE:

  • Check the engine idle speed with the cooling fan off.
  • Turn off all electrical systems and the A/C.
  • When checking the engine idle speed, the transaxle should be in neutral or park.

(a) Warm up and stop the engine.

(b) Connect the Techstream to the DLC3.

(c) Start the engine and run it at idle.

(d) Turn the Techstream on.

(e) Enter the following menus: Powertrain / Engine / Data List / Engine Speed.

Powertrain > Engine > Data List

Tester Display

Engine Speed

(f) Read the value displayed on the tester.

Standard Idle Speed:

600 to 700 rpm

11. INSPECT COMPRESSION

NOTICE:

Keep the spark plug holes free of foreign matter when measuring the compression pressure.

(a) Warm up and stop the engine.

(b) Check for DTCs.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; A25A-FKS (ENGINE CONTROL): SFI SYSTEM: DTC CHECK / CLEAR

(c) Remove the front wheel opening extension pad RH.

Click here 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+ 2019 MY Camry [08/2018 - 09/2019]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

(d) Remove the front wheel opening extension pad LH.

Click here 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+ 2019 MY Camry [08/2018 - 09/2019]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

(e) Remove the No. 1 engine under cover.

Click here 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+ 2019 MY Camry [08/2018 - 09/2019]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

(f) Remove the No. 2 engine under cover assembly.

Click here 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+ 2019 MY Camry [08/2018 - 09/2019]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

(g) Remove the 4 spark plugs.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; MAINTENANCE: A25A-FKS SPARK PLUG: REMOVAL

(h) Disconnect the fuel injector connector (for Port Injection).

(i) Disconnect the fuel injector connector (for Direct Injection).

(j) Check the cylinder compression pressure.

(1) Insert a compression gauge into the spark plug hole.

(2) Fully open the throttle.

(3) While cranking the engine, measure the compression pressure.

Standard Compression Pressure:

1500 kPa (15.3 kgf/cm2, 218 psi)

Minimum Compression Pressure:

1300 kPa (13.3 kgf/cm2, 189 psi)

Pressure Difference between Each Cylinder:

200 kPa (2.0 kgf/cm2, 29 psi) or less

NOTICE:

  • Always use a fully charged battery to obtain an engine speed of 250 rpm or more.
  • Inspect all cylinders in the same way.
  • Measure the compression pressure as quickly as possible.

(4) If the cylinder compression pressure is low, pour a small amount of engine oil into the cylinder through the spark plug hole and inspect it again.

HINT:

  • If adding oil increases the compression pressure, the piston rings and/or cylinder bore may be worn or damaged.
  • If the compression pressure stays low, a valve may be stuck or seated improperly, or there may be leaks in the cylinder head gasket.

(k) Connect the fuel injector connector (for Direct Injection).

(l) Connect the fuel injector connector (for Port Injection).

(m) Install the 4 spark plugs.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; MAINTENANCE: A25A-FKS SPARK PLUG: INSTALLATION

(n) Install the No. 2 engine under cover assembly.

Click here 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2019 - 2020 MY Camry [08/2018 - 03/2020]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

(o) Install the No. 1 engine under cover.

Click here 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2019 - 2020 MY Camry [08/2018 - 03/2020]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

(p) Install the front wheel opening extension pad LH.

Click here 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2019 - 2020 MY Camry [08/2018 - 03/2020]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

(q) Install the front wheel opening extension pad RH.

Click here 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2019 - 2020 MY Camry [08/2018 - 03/2020]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

(r) Clear the DTCs.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; A25A-FKS (ENGINE CONTROL): SFI SYSTEM: DTC CHECK / CLEAR

NOTICE:

After the inspection, clear the DTCs, check for DTCs again and make sure the normal system code is output.

12. INSPECT CO/HC

HINT:

This check determines whether or not the idle CO/HC complies with regulations.

(a) Start the engine.

(b) Run the engine at 2500 rpm for approximately 180 seconds.

(c) Insert a CO/HC meter testing probe at least 40 cm (1.31 ft.) into the tailpipe during idle.

(d) Immediately check the CO/HC concentration during idle and when the engine is running at 2500 rpm.

HINT:

When performing a 2 mode (with the engine idling/running at 2500 rpm) test, the measurement procedures are determined by applicable local regulations.

If the CO/HC concentration does not comply with the regulations, perform troubleshooting in the order given below.

(1) Check for DTCs.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; A25A-FKS (ENGINE CONTROL): SFI SYSTEM: DTC CHECK / CLEAR

(2) See the following table for possible causes, then inspect the applicable parts and repair them if necessary.

CO

HC

Problem

Cause

Normal

High

Rough idle

  1. Faulty ignition:
    • Incorrect valve timing
    • Fouled, shorted or improperly gapped spark plugs
  2. Incorrect valve clearance (valve lash adjuster assembly)
  3. Leaks in intake or exhaust valves
  4. Leaks in cylinders
  5. Faulty EGR

Low

High

Rough idle (Fluctuating HC reading)

  1. Vacuum leaks:
    • PCV hoses
    • Intake manifold
    • Throttle body with motor assembly
  2. Lean mixture causing misfire
  3. Faulty EGR

High

High

Rough idle (Black smoke from exhaust)

  1. Restricted air cleaner filter element sub-assembly
  2. Plugged PCV valve
  3. Faulty SFI systems:
    • Fuel pressure regulator assembly
    • Engine coolant temperature sensor
    • Mass air flow meter sub-assembly
    • ECM
    • Fuel injector assemblies
    • Throttle position sensor (built into throttle body with motor assembly)
  4. Faulty EGR