Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000015QKH
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 -           ]
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION; 2018 - 2024 MY Camry [06/2017 -        ]

INSTALLATION

PROCEDURE

1. INSTALL HORN BUTTON ASSEMBLY

(a) Check that the ignition switch is off.

(b) Check that the cable is disconnected from the negative (-) battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(c) When using a new spiral cable sub-assembly:

(1) Engage the wire harness clamp and disconnect the airbag connector as shown in the illustration.

*a

Wire Harness Clamp

*b

Airbag Connector

Remove in this Direction

HINT:

Be sure to engage the wire harness clamp until it is locked.

(d) When reusing a spiral cable sub-assembly or spiral cable with sensor sub-assembly:

*a

Airbag Connector

*b

Horn Connector

*c

Airbag Connector Locking Button

*d

Wire Harness Clamp

Push in this Direction

(1) Engage the wire harness clamp.

(e) Connect the 2 airbag connectors to the horn button assembly.

NOTICE:

  • When connecting any airbag connector, take care not to damage the airbag wire harness.
  • Be sure to connect the connectors to each corresponding color.

(f) Push in the 2 airbag connector locking buttons to install the 2 airbag connectors.

(g) Connect the horn connector to the horn button assembly.

(h) Push the horn button assembly to engage the 3 pins carefully and install the horn button assembly.

NOTICE:

  • Make sure that the pins are securely inserted into the steering wheel assembly holes.
  • Make sure to engage the 2 upper pins first.
  • Make sure that the horn button assembly is securely installed.

2. INSTALL LOWER NO. 2 STEERING WHEEL COVER (w/ Cover)

(a) Engage each claw to install the 3 lower No. 2 steering wheel covers.

*A

for LH Side

*B

for RH Side

*C

for Under Side

-

-

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

for A25A-FKS: Click here 2018 MY Camry [03/2017 - 08/2018]; MAINTENANCE: A25A-FKS BATTERY: INSTALLATION+ 2019 - 2024 MY Camry [08/2018 -        ]; MAINTENANCE: A25A-FKS BATTERY: INSTALLATION+

for 2GR-FKS: Click here 2018 - 2024 MY Camry [06/2017 -        ]; MAINTENANCE: 2GR-FKS BATTERY: INSTALLATION+

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here 2018 MY Camry [06/2017 - 08/2018]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2019 MY Camry [08/2018 - 09/2019]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2020 MY Camry [09/2019 - 03/2020]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2020 MY Camry [03/2020 - 10/2020]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2021 - 2022 MY Camry [10/2020 - 08/2022]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2023 - 2024 MY Camry [08/2022 -        ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION

4. INSPECT HORN BUTTON ASSEMBLY

(a) Make sure that the horn sounds.

If the horn does not sound, inspect the horn system.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; HORN: HORN SYSTEM: PROBLEM SYMPTOMS TABLE

5. PERFORM DIAGNOSTIC SYSTEM CHECK

Click here 2018 - 2024 MY Camry [03/2017 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DTC CHECK / CLEAR

6. INSPECT SRS WARNING LIGHT

Click here 2018 - 2019 MY Camry [06/2017 - 09/2019]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: OPERATION CHECK 2020 MY Camry [09/2019 - 10/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: OPERATION CHECK 2021 - 2022 MY Camry [10/2020 - 08/2022]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: OPERATION CHECK 2023 - 2024 MY Camry [08/2022 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: OPERATION CHECK