Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000015PBC
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 - 10/2020]
Title: PARKING BRAKE: PARKING BRAKE PEDAL: REMOVAL; 2018 - 2020 MY Camry [06/2017 - 10/2020]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during parking brake pedal assembly removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link
*: When performing learning using the Techstream.

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM: CALIBRATION

Disconnect cable from negative battery terminal

Perform steering sensor zero point calibration

Lane departure alert system (w/ Steering Control)

2018 - 2020 MY Camry [03/2017 - 10/2020]; PRE-COLLISION: PRE-COLLISION SYSTEM: INITIALIZATION

Pre-collision system

Intelligent clearance sonar system*

Memorize steering angle neutral point

Parking assist monitor system

2018 - 2024 MY Camry [03/2017 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: INITIALIZATION

Panoramic view monitor system

2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: INITIALIZATION

PROCEDURE

1. LOOSEN NO. 1 WIRE ADJUSTING NUT

(a) Loosen the No. 1 wire adjusting nut.

NOTICE:

If the No. 1 wire adjusting nut has been removed from the No. 1 parking brake cable assembly, replace the No. 1 wire adjusting nut with a new one.

2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: KNEE AIRBAG ASSEMBLY (for Driver Side): REMOVAL

3. REMOVE NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY

Click here 2018 - 2019 MY Camry [06/2017 - 09/2019]; HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: REMOVAL+ 2020 MY Camry [09/2019 - 03/2020]; HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: REMOVAL+ 2020 MY Camry [03/2020 - 10/2020]; HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: REMOVAL+

4. REMOVE INSTRUMENT PANEL TO PEDAL BRACKET

(a) Remove the bolt and nut.

(b) Disengage the guide to remove the instrument panel to pedal bracket.

5. SEPARATE PARKING BRAKE PEDAL ASSEMBLY

(a) Disengage the clamp.

(b) Disconnect the parking brake switch connector.

(c) Remove the 2 nuts, and separate the parking brake pedal assembly from the vehicle body.

6. REMOVE PARKING BRAKE PEDAL ASSEMBLY

(a) Pull up the parking brake pedal assembly claw.

NOTICE:

Do not damage the No. 1 parking brake cable assembly.

(b) Remove the No. 1 wire adjusting nut from the No. 1 parking brake cable assembly.

NOTICE:

If the No. 1 wire adjusting nut has been removed from the No. 1 parking brake cable assembly, replace the No. 1 wire adjusting nut with a new one.

(c) Remove the clip from the No. 1 parking brake cable assembly.

(d) Remove the parking brake pedal assembly from the No. 1 parking brake cable assembly.