Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM1000000015P32 |
Model Year Start: 2018 |
Model: Camry |
Prod Date Range: [06/2017 - 10/2020] |
Title: THEFT DETERRENT / KEYLESS ENTRY: TRANSPONDER KEY ECU: REMOVAL; 2018 - 2020 MY Camry [06/2017 - 10/2020] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during transponder key ECU removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Disconnect cable from negative battery terminal
|
Perform steering sensor zero point calibration
|
Lane departure alert system (w/ Steering Control)
|
|
Pre-collision system
|
Intelligent clearance sonar system*
|
Memorize steering angle neutral point
|
Parking assist monitor system
|
|
Panoramic view monitor system
|
|
Steering sensor
|
-
Steering angle neutral point (Initialize parking assist monitor system)
-
Steering angle setting
|
Parking assist monitor system
|
for Initialization
for Calibration
|
Transponder key ECU assembly
|
Code registration (Immobiliser system (w/o Smart Key System))
|
-
Wireless door lock control system
-
Engine start
|
|
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.
Click here
PROCEDURE
1. REMOVE AIR CONDITIONER UNIT ASSEMBLY
Click here
2. REMOVE TRANSPONDER KEY ECU ASSEMBLY
(a) Disconnect the connector to remove the transponder key ECU assembly.
|
|
|