Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM10000000158XE |
Model Year Start: 2018 |
Model: Camry |
Prod Date Range: [06/2017 -
] |
Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: C1A46; Yaw Rate Sensor; 2018 - 2024 MY Camry [06/2017 - ] |
DTC
|
C1A46
|
Yaw Rate Sensor
|
DESCRIPTION
The blind spot monitor sensor receives yaw rate signals from the airbag sensor assembly (yaw rate and acceleration sensor) via CAN communication.
Blind Spot Monitor Master
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
C1A46
|
Yaw Rate Sensor
|
A fail flag is transmitted from the airbag sensor assembly
|
-
Vehicle stability control system
-
Blind spot monitor sensor RH
|
Blind Spot Monitor Slave
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
C1A46
|
Yaw Rate Sensor
|
A fail flag is transmitted from the airbag sensor assembly
|
-
Vehicle stability control system
-
Blind spot monitor sensor LH
|
CAUTION / NOTICE / HINT
NOTICE:
When checking for DTCs, make sure that the blind spot monitor system is turned on.
PROCEDURE
1.
|
CHECK OTHER DTC OUTPUT (VEHICLE STABILITY CONTROL SYSTEM)
|
(a) Check for vehicle stability control system DTCs.
w/o Electric Parking Brake System: Click here
w/ Electric Parking Brake System: Click here
OK:
Vehicle stability control system DTCs are not output.
OK
|
|
|
(a) Turn the engine switch off.
(b) Turn the engine switch on (IG).
(c) Recheck for DTCs and check if the same DTC is output again.
Body Electrical > Blind Spot Monitor Master > Trouble Codes
Body Electrical > Blind Spot Monitor Slave > Trouble Codes
Result
|
Proceed to
|
No DTCs are output.
|
A
|
DTC C1A46 is output ("Blind Spot Monitor Master").
|
B
|
DTC C1A46 is output ("Blind Spot Monitor Slave").
|
C
|
|