BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/o Electric Parking Brake System): C1234,C1472,C1474; Yaw Rate Sensor; 2018 - 2020 MY Camry [06/2017

Last Modified: 11-20-2023	6.11:8.1.0	Doc ID: RM10000000155UL
Model Year Start: 2018	Model: Camry	Prod Date Range: [06/2017 - 10/2020]
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/o Electric Parking Brake System): C1234,C1472,C1474; Yaw Rate Sensor; 2018 - 2020 MY Camry [06/2017 - 10/2020]

DTC

C1234

Yaw Rate Sensor

DTC

C1472

Acceleration Sensor

DTC

C1474

Forward and Rearward G Sensor

DESCRIPTION

The skid control ECU (brake actuator assembly) receives signals from the yaw rate and acceleration sensor (airbag sensor assembly) via CAN communication.

HINT:

If there is a malfunction in the bus lines between the yaw rate and acceleration sensor (airbag sensor assembly) and the CAN communication system, DTC U0123 (Lost Communication with Yaw Rate Sensor Module) is output. When U0123 is output together with C1234, C1472 and/or C1474, inspect and repair the trouble areas indicated by U0123 first.

These DTCs may be stored if one of the following occurs:

Yaw rate and acceleration sensor circuit malfunction.
Yaw rate and acceleration sensor (airbag sensor assembly) installation abnormality.
Yaw rate and acceleration sensor signal malfunction.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
C1234	Yaw Rate Sensor	Any of the following is detected: The yaw rate sensor offset value is estimated as less than -5.25 deg/s or more than 5.25 deg/s based on offset correction performed when the vehicle is stopped and then the vehicle starts off. The offset correction did not complete with the vehicle stopped, and the yaw rate sensor offset value is estimated as less than -15 deg/s or more than 15 deg/s based on the offset correction performed while the vehicle is being driven. The offset correction completed with the vehicle stopped and the yaw rate sensor offset value is less than -7.5 deg/s or more than 7.5 deg/s. The yaw rate sensor offset value is estimated as less than -7.5 deg/s or more than 7.5 deg/s based on the offset correction performed while the vehicle is being driven. After the VSC system has turned on, but before the vehicle starts off, the yaw rate sensor value is less than -30 deg/s or more than 30 deg/s for 5 seconds or more when the vehicle is stopped. After the VSC system has turned on, but before the vehicle starts off, the yaw rate sensor value is less than -30 deg/s or more than 30 deg/s for 0.5 seconds or more when the vehicle starts off. After the VSC system has turned on, but before the vehicle starts off, as the vehicle starts off, the yaw rate sensor value is less than -30 deg/s or more than 30 deg/s for 0.5 seconds or more. The yaw rate sensor value is less than -94.75 deg/s or more than 94.75 deg/s for 0.8 seconds or more. The change of the yaw rate sensor value within 0.04 seconds is abnormal. The value from the yaw rate sensor is judged as abnormal based on the skid control ECU (brake actuator assembly) estimation.	Yaw rate sensor (airbag sensor assembly) installation Yaw rate sensor (airbag sensor assembly) Yaw rate sensor circuit
C1472	Acceleration Sensor	Any of the following is detected: With the vehicle stopped, the internal acceleration value is less than -7 m/s² or more than 7 m/s² for 0.4 seconds or more. The acceleration sensor offset value is estimated as less than -2.25 m/s² or more than 2.25 m/s² based on the offset correction performed while the vehicle is being driven. The acceleration sensor value is less than -14.6 m/s² or more than 14.6 m/s² for 0.8 seconds or more.	Acceleration sensor (airbag sensor assembly) installation Acceleration sensor (airbag sensor assembly) Acceleration sensor circuit
C1474	Forward and Rearward G Sensor	Any of the following is detected: The acceleration sensor offset value is estimated as less than -2.25 m/s² or more than 2.25 m/s² based on the offset correction performed while the vehicle is being driven. The acceleration sensor value is less than -14.6 m/s² or more than 14.6 m/s² for 3 seconds or more.	Acceleration sensor (airbag sensor assembly) installation Acceleration sensor (airbag sensor assembly) Acceleration sensor circuit

DTC Detection Conditions: C1234

		Vehicle Condition
		Pattern 1	Pattern 2	Pattern 3	Pattern 4	Pattern 5
Diagnosis Condition	The offset correction did not complete with the vehicle stopped.	-	○	-	-	-
	The offset correction completed with the vehicle stopped.	-	-	○	-	-
	The vehicle is being driven.	-	-	-	○	-
	The VSC system has turned on, but the vehicle has not started off.	-	-	-	-	○
Malfunction Status	The yaw rate sensor offset value is estimated as less than -5.25 deg/s or more than 5.25 deg/s based on offset correction performed when the vehicle is stopped and then the vehicle starts off.	○	-	-	-	-
	The yaw rate sensor offset value is estimated as less than -15 deg/s or more than 15 deg/s based on the offset correction performed while the vehicle is being driven.	-	○	-	-	-
	The yaw rate sensor offset value is less than -7.5 deg/s or more than 7.5 deg/s.	-	-	○	-	-
	The yaw rate sensor offset value is estimated as less than -7.5 deg/s or more than 7.5 deg/s based on the offset correction performed.	-	-	-	○	-
	The yaw rate sensor value is less than -30 deg/s or more than 30 deg/s.	-	-	-	-	○
Detection Time		-	-	-	-	5 seconds or more when the vehicle is stopped.
Number of Trips		1 trip	1 trip	1 trip	1 trip	1 trip

HINT:

DTC will be output when conditions for either of the patterns in the table above are met.

DTC Detection Conditions: C1234

		Vehicle Condition
		Pattern 6	Pattern 7	Pattern 8	Pattern 9	Pattern 10
Diagnosis Condition	The VSC system has turned on, but the vehicle has not started off.	○	○	-	-	-
Malfunction Status	The yaw rate sensor value is less than -30 deg/s or more than 30 deg/s.	○	-	-	-	-
	As the vehicle starts off, the yaw rate sensor value is less than -30 deg/s or more than 30 deg/s.	-	○	-	-	-
	The yaw rate sensor value is less than -94.75 deg/s or more than 94.75 deg/s.	-	-	○	-	-
	The change of the yaw rate sensor value within 0.04 seconds is abnormal.	-	-	-	○	-
	The value from the yaw rate sensor is judged as abnormal based on the skid control ECU (brake actuator assembly) estimation.	-	-	-	-	○
Detection Time		0.5 seconds or more when the vehicle starts off.	0.5 seconds or more	0.8 seconds or more	-	-
Number of Trips		1 trip	1 trip	1 trip	1 trip	1 trip

HINT:

DTC will be output when conditions for either of the patterns in the table above are met.

DTC Detection Conditions: C1472

		Vehicle Condition
		Pattern 1	Pattern 2	Pattern 3
Diagnosis Condition	The vehicle stopped.	○	-	-
Diagnosis Condition	Vehicle is being driven.	-	○	-
Malfunction Status	The internal acceleration value is less than -7 m/s² or more than 7 m/s².	○	-	-
	The acceleration sensor offset value is estimated as less than -2.25 m/s² or more than 2.25 m/s² based on the offset correction performed.	-	○	-
	The acceleration sensor value is less than -14.6 m/s² or more than 14.6 m/s².	-	-	○
Detection Time		0.4 seconds or more	-	0.8 seconds or more
Number of Trips		1 trip	1 trip	1 trip

HINT:

DTC will be output when conditions for either of the patterns in the table above are met.

DTC Detection Conditions: C1474

		Vehicle Condition
		Pattern 1	Pattern 2
Diagnosis Condition	The vehicle is being driven.	○	-
Malfunction Status	The acceleration sensor offset value is estimated as less than -2.25 m/s² or more than 2.25 m/s² based on the offset correction performed.	○	-
Malfunction Status	The acceleration sensor value is less than -14.6 m/s² or more than 14.6 m/s².	-	○
Detection Time		-	3 seconds or more
Number of Trips		1 trip	1 trip

HINT:

DTC will be output when conditions for either of the patterns in the table above are met.

WIRING DIAGRAM

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following procedure.
After replacing or reinstalling the yaw rate and acceleration sensor (airbag sensor assembly), perform system variant learning and acceleration sensor zero point calibration.
Click here

HINT:

When U0123 and/or U0126 is output together with C1234, C1472 and/or C1474, inspect and repair the trouble areas indicated by U0123 and/or U0126 first.

Click here

PROCEDURE

CHECK DTC

(a) Clear the DTCs.

Chassis > ABS/VSC/TRAC/EPB > Clear DTCs

(b) Turn the ignition switch off.

(d) At a speed of 30 km/h (18 mph) or more, drive the vehicle, turn the steering wheel, and decelerate (depress the brake pedal) the vehicle.

(e) Turn the ignition switch off.

(f) Turn the ignition switch to ON again and check that no CAN communication system DTCs are output.

Click here

Result	Proceed to
CAN communication system DTCs are not output	A
CAN communication system DTCs are output	B

INSPECT CAN COMMUNICATION SYSTEM

2.	CHECK AIRBAG SENSOR ASSEMBLY INSTALLATION

(a) Turn the ignition switch off.

(b) Check that the yaw rate and acceleration sensor (airbag sensor assembly) has been installed properly.

Click here

OK:

The yaw rate and acceleration sensor (airbag sensor assembly) is tightened to the specified torque.

The yaw rate and acceleration sensor (airbag sensor assembly) is not installed in a tilted position.

INSTALL AIRBAG SENSOR ASSEMBLY CORRECTLY

3.	CHECK HARNESS AND CONNECTOR (POWER SOURCE TERMINAL)

(a) Make sure that there is no looseness at the locking part and the connecting part of the connector.

OK:

The connector is securely connected.

*a	Front view of wire harness connector (to Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly))

(b) Disconnect the K73 yaw rate and acceleration sensor (airbag sensor assembly) connector.

OK:

No deformation or corrosion.

(d) Turn the ignition switch to ON.

(e) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Condition	Specified Condition
K73-36 (IG2) - Body ground	Ignition switch ON	11 to 14 V

REPAIR OR REPLACE HARNESS OR CONNECTOR (POWER SOURCE CIRCUIT)

4.	CHECK HARNESS AND CONNECTOR (GROUND TERMINAL)

(a) Turn the ignition switch off.

*a	Front view of wire harness connector (to Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly))

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
K73-33 (E1) - Body ground	Always	Below 1 Ω
K73-32 (E2) - Body ground	Always	Below 1 Ω

REPLACE AIRBAG SENSOR ASSEMBLY

REPAIR OR REPLACE HARNESS OR CONNECTOR (GROUND CIRCUIT)