| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM10000000155TG |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - 10/2020] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/ Electric Parking Brake System): C1224; NE Signal; 2018 - 2020 MY Camry [06/2017 - 10/2020] | ||
|
DTC |
C1224 |
NE Signal |
DESCRIPTION
The skid control ECU (brake actuator assembly) receives engine speed signals from the ECM via CAN communication.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C1224 |
NE Signal |
The vehicle speed is 6 km/h (4 mph) or more, the +BS terminal voltage is between 9.6 and 16.5 V, and the engine speed signal is more than 12800 rpm for 2.5 seconds or more. |
|
PROCEDURE
|
1. |
CHECK CAN COMMUNICATION SYSTEM |
(a) Check if CAN communication system DTCs are output.
Click here
![2018 - 2024 MY Camry [03/2017 - ]; NETWORKING: CAN COMMUNICATION SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING](/t3Portal/stylegraphics/info.gif)
|
Result |
Proceed to |
|---|---|
|
DTCs are not output |
A |
|
DTCs are output |
B |
| B |
|
|
|
2. |
CHECK SFI SYSTEM |
(a) Check if SFI system DTCs are output.
Powertrain > Engine > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTCs are not output |
A |
|
DTCs are output |
B |
| A |
|
REPLACE ECM for A25A-FKS: Click here
for 2GR-FKS: Click here
|
| B |
|
INSPECT SFI SYSTEM for A25A-FKS: Click here
for 2GR-FKS: Click here
|
|
|