| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM10000000155SP |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - 10/2020] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/ Electric Parking Brake System): PROBLEM SYMPTOMS TABLE; 2018 - 2020 MY Camry [06/2017 - 10/2020] | ||
PROBLEM SYMPTOMS TABLE
If there are no DTCs output and the problem still occurs, check the suspected areas for each problem symptom in the order given in the following table and proceed to the relevant troubleshooting page.
NOTICE:
When replacing the skid control ECU (brake actuator assembly), sensors, etc., turn the engine switch off.
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Vehicle Stability Control System
|
Symptom |
Suspected Area |
Link |
|---|---|---|
|
ABS warning light abnormal (Remains on) |
Refer to the procedure for "ABS Warning Light Remains ON" |
|
|
ABS warning light abnormal (Does not come on) |
Refer to the procedure for "ABS Warning Light does not Come ON" |
|
|
Brake system warning light (red indicator) abnormal (Remains on) |
Refer to the procedure for "Brake Warning Light Remains ON" |
|
|
Brake system warning light (red indicator) abnormal (Does not come on) |
Refer to the procedure for "Brake Warning Light does not Come ON" |
|
|
Brake hold standby indicator light abnormal |
Refer to the procedure for "Brake Hold Standby Indicator Light Circuit" |
|
|
Brake hold operated indicator light abnormal |
Refer to the procedure for "Brake Hold Operated Indicator Light Circuit" |
|
|
Slip indicator light abnormal (Remains on) |
Refer to the procedure for "Slip Indicator Light Remains ON" |
|
|
Slip indicator light abnormal (Does not come on) |
Refer to the procedure for "Slip Indicator Light does not Come ON" |
|
|
TRAC does not operate |
Refer to the procedure for "TRAC does not Operate" |
|
|
Excessive brake pedal travel (No fluid leaks and no air in system) |
Refer to the procedure for "Excessive Brake Pedal Travel (No Fluid Leaks and No Air in System)" |
|
|
ABS operates before necessary when braking |
Refer to the procedure for "ABS Operates Before Necessary When Braking" |
|
|
VSC does not operate or VSC does not operate correctly |
Refer to the procedure for "VSC does not Operate or VSC does not Operate Correctly" |
|
|
Brake actuator operation sound is loud during initial check |
Refer to the procedure for "Brake Actuator Operation Sound is Loud during Initial Check" |
|
|
VSC OFF switch abnormal |
Refer to the procedure for "VSC OFF Switch Circuit" |
|
![2018 - 2020 MY Camry [06/2017 - 10/2020]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/ Electric Parking Brake System): ABS Warning Light Remains ON](/t3Portal/stylegraphics/info.gif)
|
|