| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001508U |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - 10/2020] |
| Title: PARKING BRAKE: ELECTRIC PARKING BRAKE ACTUATOR: ON-VEHICLE INSPECTION; 2018 - 2020 MY Camry [06/2017 - 10/2020] | ||
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT PARKING BRAKE ACTUATOR ASSEMBLY
HINT:
Using the Techstream to perform the Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3 with the engine switch off.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / ABS/VSC/TRC/EPB / Active Test.
(e) When the vehicle's tires are lifted off the ground and the Techstream is used to operate the electric parking brake, check the condition of the rear tires.
(f) According to the display on the tester, perform the Active Test.
Chassis > ABS/VSC/TRAC/EPB > Active Test
|
Tester Display |
|---|
|
PKB Lock Control |
Chassis > ABS/VSC/TRAC/EPB > Active Test
|
Tester Display |
|---|
|
PKB Release Control |
If the result is not as specified, inspect the electric parking brake actuator.
Click here
![2018 - 2024 MY Camry [06/2017 - ]; PARKING BRAKE: ELECTRIC PARKING BRAKE ACTUATOR: INSPECTION](/t3Portal/stylegraphics/info.gif)
(g) Turn the engine switch on (IG), push the electric parking brake switch to the lock side for 1 second and check that the parking brake indicator light (red) illuminates.
(h) Also, check that the brake warning light / yellow (minor malfunction) does not illuminate at this time.
|
|