| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014YX4 |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - ] |
| Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: Engine Coolant Temperature Receiver Gauge Malfunction; 2018 - 2024 MY Camry [06/2017 - ] | ||
|
Engine Coolant Temperature Receiver Gauge Malfunction |
DESCRIPTION
In this circuit, the combination meter assembly receives engine coolant temperature signals from the ECM via CAN communication. The combination meter assembly displays an engine coolant temperature warning based on the data received from the ECM.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
- When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
-
Before replacing the ECM, refer to Registration.
w/ Smart Key System: Click here
![2018 - 2019 MY Camry [03/2017 - 09/2019]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function): REGISTRATION](/t3Portal/stylegraphics/info.gif)
w/o Smart Key System: Click here
HINT:
If there is an open or short in the engine coolant temperature sensor circuit, the ECM stores DTCs. Troubleshoot the SFI system.
for A25A-FKS: Click here
for 2GR-FKS: Click here
PROCEDURE
|
1. |
CHECK CAN COMMUNICATION SYSTEM |
(a) Check if CAN communication system DTCs are output.
Click here
|
Result |
Proceed to |
|---|---|
|
DTCs are not output |
A |
|
DTCs are output |
B |
| B |
|
|
|
2. |
CHECK FOR DTC (SFI SYSTEM) |
(a) Check if SFI system DTCs are output.
Powertrain > Engine > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTCs are not output |
A |
|
DTCs are output |
B |
| B |
|
GO TO SFI SYSTEM for A25A-FKS: Click here
for 2GR-FKS: Click here
|
|
|
3. |
PERFORM ACTIVE TEST USING TECHSTREAM (WATER TEMPERATURE METER OPERATION) |
|
*a |
Water Temperature Meter Operation 50C (122F) |
|
*b |
Water Temperature Meter Operation 60C (140F) |
|
*c |
Water Temperature Meter Operation 70C (158F) |
|
*d |
Water Temperature Meter Operation 80C (176F) |
|
*e |
Water Temperature Meter Operation (Middle) |
|
*f |
Water Temperature Meter Operation 110C (230F) |
|
*g |
Water Temperature Meter Operation 120C (248F) |
|
*h |
Water Temperature Meter Operation 127C (260F) |
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Combination Meter / Active Test.
(e) Perform the Active Test according to the display on the Techstream.
Body Electrical > Combination Meter > Active Test
|
Tester Display |
Measurement Item |
Control Range |
Diagnostic Note |
|---|---|---|---|
|
Water Temperature Meter Operation (50C,122F) |
Engine coolant temperature receiver gauge 50°C (122°F) |
OFF or ON |
- |
|
Water Temperature Meter Operation (60C,140F) |
Engine coolant temperature receiver gauge 60°C (140°F) |
OFF or ON |
- |
|
Water Temperature Meter Operation (70C,158F) |
Engine coolant temperature receiver gauge 70°C (158°F) |
OFF or ON |
- |
|
Water Temperature Meter Operation (80C,176F) |
Engine coolant temperature receiver gauge 80°C (176°F) |
OFF or ON |
- |
|
Water Temperature Meter Operation (Middle) |
Engine coolant temperature receiver gauge (Middle) |
OFF or ON |
- |
|
Water Temperature Meter Operation (110C,230F) |
Engine coolant temperature receiver gauge 110°C (230°F) |
OFF or ON |
- |
|
Water Temperature Meter Operation (120C,248F) |
Engine coolant temperature receiver gauge 120°C (248°F) |
OFF or ON |
- |
|
Water Temperature Meter Operation (127C,260F) |
Engine coolant temperature receiver gauge 127°C (260°F) |
OFF or ON |
- |
Body Electrical > Combination Meter > Active Test
|
Tester Display |
|---|
|
Water Temperature Meter Operation (50C,122F) |
Body Electrical > Combination Meter > Active Test
|
Tester Display |
|---|
|
Water Temperature Meter Operation (60C,140F) |
Body Electrical > Combination Meter > Active Test
|
Tester Display |
|---|
|
Water Temperature Meter Operation (70C,158F) |
Body Electrical > Combination Meter > Active Test
|
Tester Display |
|---|
|
Water Temperature Meter Operation (80C,176F) |
Body Electrical > Combination Meter > Active Test
|
Tester Display |
|---|
|
Water Temperature Meter Operation (Middle) |
Body Electrical > Combination Meter > Active Test
|
Tester Display |
|---|
|
Water Temperature Meter Operation (110C,230F) |
Body Electrical > Combination Meter > Active Test
|
Tester Display |
|---|
|
Water Temperature Meter Operation (120C,248F) |
Body Electrical > Combination Meter > Active Test
|
Tester Display |
|---|
|
Water Temperature Meter Operation (127C,260F) |
OK:
Engine coolant temperature receiver gauge indication is normal.
| OK |
|
REPLACE ECM for A25A-FKS: Click here
for 2GR-FKS: Click here
|
| NG |
|
REPLACE COMBINATION METER ASSEMBLY
|
|
|