Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014YIG
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 -           ]
Title: PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: C1611; ECU Malfunction; 2018 - 2024 MY Camry [06/2017 -        ]

DTC

C1611

ECU Malfunction

DESCRIPTION

This DTC is stored if the rear television camera assembly judges that there is an internal malfunction as a result of its self check.

HINT:

The rear television camera assembly stores different types of information during initialization. If the rear television camera assembly cannot read the stored information when it is activated, the rear television camera assembly judges that there is an internal malfunction and stores this DTC.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

C1611

ECU Malfunction

When any of the following conditions is met:

  • EEPROM status (Initial read) malfunction
  • CPU communication malfunction
  • Video output malfunction

Rear television camera assembly

Parking Assist Camera

CAUTION / NOTICE / HINT

NOTICE:

  • When "!" is displayed on the radio and display receiver assembly after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.

    Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: INITIALIZATION 2021 - 2024 MY Camry [10/2020 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: INITIALIZATION

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

    Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: CALIBRATION 2021 - 2024 MY Camry [10/2020 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: CALIBRATION

PROCEDURE

1.

READ VALUE USING TECHSTREAM

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Chassis / Parking Assist Camera / Data List.

(e) Read the Data List according to the display on the Techstream.

Chassis > Parking Assist Camera > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Video Output Status

Output condition of video signal

OK or NG

OK: Output condition of video signal is normal

NG: Output condition of video signal is abnormal

-

EEPROM Status (Initial read)

Rear television camera assembly information

OK or NG

OK: Rear television camera assembly normal

NG: Rear television camera assembly abnormal

-

CPU Communication Status

Rear television camera assembly information

OK or NG

OK: Rear television camera assembly normal

NG: Rear television camera assembly abnormal

-

Chassis > Parking Assist Camera > Data List

Tester Display

Video Output Status

EEPROM Status (Initial read)

CPU Communication Status

Result

Proceed to

OK is displayed for all items

A

NG is displayed for EEPROM status (Initial read)

NG is displayed for items other than EEPROM status (Initial read)

B

B

REPLACE REAR TELEVISION CAMERA ASSEMBLY 2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: TELEVISION CAMERA (for Rear): REMOVAL 2021 - 2024 MY Camry [10/2020 -        ]; PARK ASSIST / MONITORING: TELEVISION CAMERA (for Rear): REMOVAL

A

2.

PERFORM CALIBRATION

(a) Perform the following procedure depending on the memory conditions to register the vehicle information into the rear television camera assembly.

(1) Rear television camera assembly optical axis adjustment (back camera position setting).

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: CALIBRATION 2021 - 2024 MY Camry [10/2020 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: CALIBRATION

(2) Steering angle setting.

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: CALIBRATION 2021 - 2024 MY Camry [10/2020 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: CALIBRATION

NEXT

3.

CHECK DTC OUTPUT

(a) Clear the DTCs.

Chassis > Parking Assist Camera > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Chassis > Parking Assist Camera > Trouble Codes

HINT:

  • If DTC C1611 is output, perform the procedure to allow the rear television camera assembly to store the vehicle information again.
  • If DTC C1611 is still output after performing the procedure to make the rear television camera assembly store the vehicle information 3 times, replace the rear television camera assembly.

Result

Proceed to

DTC C1611 is output

A

DTC C1611 is not output

B

A

REPLACE REAR TELEVISION CAMERA ASSEMBLY 2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: TELEVISION CAMERA (for Rear): REMOVAL 2021 - 2024 MY Camry [10/2020 -        ]; PARK ASSIST / MONITORING: TELEVISION CAMERA (for Rear): REMOVAL

B

END