Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014YGE
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 -           ]
Title: 2GR-FKS (COOLING): THERMOSTAT: INSTALLATION; 2018 - 2024 MY Camry [06/2017 -        ]

INSTALLATION

PROCEDURE

1. INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

(a) Install a new gasket to the water inlet with thermostat sub-assembly.

(b) Install the water inlet with thermostat sub-assembly with the 2 bolts and 2 nuts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

2. CONNECT WATER BY-PASS HOSE

(a) Connect the water by-pass hose and slide the clip to secure it.

3. INSTALL FRONT NO. 1 ENGINE MOUNTING BRACKET LH

Click here 2018 - 2024 MY Camry [06/2017 -        ]; 2GR-FKS (ENGINE MECHANICAL): ENGINE UNIT: REASSEMBLY+

4. CONNECT ENGINE WIRE

(a) Engage the clamp to connect the engine wire.

(b) Install the bolt.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

(c) Connect the water inlet with thermostat sub-assembly connector.

5. INSTALL ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH

(a) Install the engine mounting insulator sub-assembly RH to the engine mounting spacer and vehicle body with the nut and 2 bolts.

Torque:

72 N·m {734 kgf·cm, 53 ft·lbf}

NOTICE:

Temporarily tighten the bolt (A), and then fully tighten the 2 bolts and nut in the order of (B), (A) and (C).

(b) Install the engine mounting insulator sub-assembly RH to the front No. 1 engine mounting bracket LH with the 3 bolts and nut.

Torque:

Bolt :

72 N·m {734 kgf·cm, 53 ft·lbf}

Nut :

42 N·m {428 kgf·cm, 31 ft·lbf}

(c) Install the suction hose sub-assembly, suction pipe sub-assembly and air conditioning tube and accessory assembly with the bolt.

Torque:

8.0 N·m {82 kgf·cm, 71 in·lbf}

(d) Engage the 2 clamps.

6. INSTALL RADIATOR RESERVE TANK ASSEMBLY

(a) Install the radiator reserve tank assembly with the bolt and nut in the order shown in the illustration.

Torque:

5.0 N·m {51 kgf·cm, 44 in·lbf}

(b) Engage the clamp.

7. INSTALL ENGINE MOUNTING STAY NO.2 RH

Click here 2018 - 2024 MY Camry [06/2017 -        ]; 2GR-FKS (INTAKE / EXHAUST): INTAKE MANIFOLD: INSTALLATION+

8. INSTALL V-BANK COVER SUB-ASSEMBLY

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2021 - 2024 MY Camry [10/2020 -        ]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

9. ADD ENGINE COOLANT

Click here 2018 - 2024 MY Camry [06/2017 -        ]; 2GR-FKS (COOLING): COOLANT: REPLACEMENT+

10. INSPECT FOR COOLANT LEAK

Click here 2018 - 2024 MY Camry [06/2017 -        ]; 2GR-FKS (COOLING): COOLING SYSTEM: ON-VEHICLE INSPECTION+

11. INSTALL ENGINE UNDER COVER REAR RH

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2021 - 2024 MY Camry [10/2020 -        ]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

12. INSTALL ENGINE UNDER COVER REAR LH

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2021 - 2024 MY Camry [10/2020 -        ]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

13. INSTALL ENGINE UNDER COVER NO.1

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2021 - 2024 MY Camry [10/2020 -        ]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

14. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2021 - 2024 MY Camry [10/2020 -        ]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

15. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2021 - 2024 MY Camry [10/2020 -        ]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+