Last Modified: 06-03-2026 6.11:8.1.0 Doc ID: RM1000000014WMD
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 -           ]
Title: 2GR-FKS (LUBRICATION): OIL PRESSURE SWITCH: INSPECTION; 2018 - 2024 MY Camry [06/2017 -        ]

INSPECTION

PROCEDURE

1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

(a) Disengage the clamp to disconnect the wire harness protector.

*1

Wire Harness Protector

(b) Disconnect the engine oil pressure switch assembly connector.

(c) Start the engine.

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection

Condition

Specified Condition

1 - Switch body

Idling

10 kΩ or higher

Engine stopped

Below 1 Ω

If the result is not as specified, replace the engine oil pressure switch assembly.

(e) Connect the engine oil pressure switch assembly connector.

(f) Connect the wire harness protector.