Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014WMD
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 -           ]
Title: 2GR-FKS (LUBRICATION): OIL PRESSURE SWITCH: INSPECTION; 2018 - 2024 MY Camry [06/2017 -        ]

INSPECTION

PROCEDURE

1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

(a) Disengage the clamp to disconnect the wire harness protector.

*1

Wire Harness Protector

(b) Disconnect the engine oil pressure switch assembly connector.

(c) Start the engine.

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - Switch body

Idling

10 kΩ or higher

Engine stopped

Below 1 Ω

If the result is not as specified, replace the engine oil pressure switch assembly.

(e) Connect the engine oil pressure switch assembly connector.

(f) Connect the wire harness protector.