| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014WB8 |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - ] |
| Title: 2GR-FKS (ENGINE MECHANICAL): FRONT CRANKSHAFT OIL SEAL: INSTALLATION; 2018 - 2024 MY Camry [06/2017 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL TIMING CHAIN CASE OIL SEAL
|
(a) Apply MP grease to the lip of a new timing chain case oil seal. |
|
(b) Using SST and a hammer, tap in the timing chain case oil seal until its surface is flush with the timing chain cover assembly edge.
SST: 09316-60011
09316-00011
Oil Seal Protrusion Height:
0 to 1.0 mm (0 to 0.0394 in.)
NOTICE:
- Keep the lip free from foreign matter.
- Do not tap in the timing chain case oil seal at an angle.
2. INSTALL CRANKSHAFT PULLEY
(a) Align the pulley set key with the key groove of the crankshaft pulley.
(b) Using SST to hold the crankshaft pulley in place, tighten the crankshaft pulley set bolt.
|
*a |
Hold |
|
Turn |
SST: 09213-70011
09213-70020
SST: 09330-00021
Torque:
260 N·m {2651 kgf·cm, 192 ft·lbf}
3. INSTALL V-RIBBED BELT
Click here
![2018 - 2024 MY Camry [06/2017 - ]; MAINTENANCE: 2GR-FKS DRIVE BELT: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
4. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
Click here
|
|