Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM1000000014VVV |
Model Year Start: 2018 |
Model: Camry |
Prod Date Range: [06/2017 - 10/2020] |
Title: SEAT: FRONT SEAT CUSHION HEATER (for Power Seat): REMOVAL; 2018 - 2020 MY Camry [06/2017 - 10/2020] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the front seat cushion heater assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure
|
Necessary Procedures
|
Effects / Inoperative when not performed
|
Link
|
Disconnect cable from negative battery terminal
|
Perform steering sensor zero point calibration
|
Lane departure alert system (w/ Steering Control)
|
|
Perform steering sensor zero point calibration
|
Intelligent clearance sonar system*
|
Memorize steering angle neutral point
|
Parking assist monitor system
|
|
Panoramic view monitor system
|
|
Front passenger seat
|
Zero point calibration (Occupant classification system)
|
-
Occupant classification system
-
Passenger airbag ON/OFF indicator
-
Airbag system (Front passenger side)
-
Seat belt warning system (Front passenger)
|
|
HINT:
-
Use the same procedure for the RH side and LH side.
-
The following procedure is for the LH side.
PROCEDURE
1. REMOVE FRONT SEAT ASSEMBLY
Click here
2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
Click here
3. REMOVE FRONT SEAT FRONT CUSHION SHIELD
Click here
4. REMOVE FRONT SEAT CUSHION SHIELD
Click here
5. REMOVE FRONT SEAT INNER CUSHION SHIELD
Click here
6. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
Click here
7. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Click here
8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
Click here
9. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY
(a) Remove the 32 tag pins and front seat cushion heater assembly from the separate type front seat cushion cover.
|
|
|