Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM1000000014VVJ |
Model Year Start: 2018 |
Model: Camry |
Prod Date Range: [06/2017 - 10/2020] |
Title: SEAT: FRONT SEATBACK HEATER (for Manual Seat): REMOVAL; 2018 - 2020 MY Camry [06/2017 - 10/2020] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the front seatback heater assembly RH removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure
|
Necessary Procedures
|
Effects / Inoperative when not performed
|
Link
|
Disconnect cable from negative battery terminal
|
Perform steering sensor zero point calibration
|
Lane departure alert system (w/ Steering Control)
|
|
Pre-collision system
|
Intelligent clearance sonar system*
|
Memorize steering angle neutral point
|
Parking assist monitor system
|
|
Panoramic view monitor system
|
|
Front passenger seat
|
Zero point calibration (Occupant classification system)
|
-
Occupant classification system
-
Passenger airbag ON/OFF indicator
-
Airbag system (Front passenger side)
-
Seat belt warning system (Front passenger)
|
|
PROCEDURE
1. REMOVE FRONT SEAT ASSEMBLY RH
Click here
2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
Click here
3. REMOVE VERTICAL ADJUSTING HANDLE RH
Click here
4. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH
Click here
5. REMOVE FRONT SEAT CUSHION SHIELD RH
Click here
6. REMOVE FRONT SEAT INNER CUSHION SHIELD RH
Click here
7. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
Click here
8. REMOVE FRONT SEAT HEADREST SUPPORT
Click here
9. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Click here
10. REMOVE SEPARATE TYPE FRONT SEATBACK COVER
Click here
11. REMOVE FRONT SEATBACK HEATER ASSEMBLY RH
(a) Remove the 16 tag pins and front seatback heater assembly RH from the separate type front seatback cover.
|
|
|