| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014V95 |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - 08/2018] |
| Title: LIGHTING (INT): PERSONAL LIGHT: INSPECTION; 2018 MY Camry [06/2017 - 08/2018] | ||
INSPECTION
PROCEDURE
1. INSPECT MAP LIGHT (ROOF CONSOLE BOX SUB-ASSEMBLY) (for TMC Made Normal Roof)
|
*a |
Component without harness connected (Map Light (Roof Console Box Sub-assembly)) |
(a) Inspect the map light LH and map light RH.
(1) Apply battery voltage to the connector and check that the map light LH and map light RH come on.
OK:
|
Measurement Condition |
Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → 1 (+B1) Battery negative (-) → 4 (GND) |
Map light switch LH on |
Map light LH comes on |
|
Map light switch RH on |
Map light RH comes on |
If the result is not as specified, replace the map light (roof console box sub-assembly).
2. INSPECT MAP LIGHT (ROOF CONSOLE BOX SUB-ASSEMBLY) (for TMC Made except Normal Roof)
|
*a |
Component without harness connected (Map Light (Roof Console Box Sub-assembly)) |
(a) Inspect the map light LH and map light RH.
(1) Apply battery voltage to the connector and check that the map light LH and map light RH come on.
OK:
|
Measurement Condition |
Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → 14 (+B1) Battery negative (-) → 15 (GND) |
Dome light switch off and map light switch LH on |
Map light LH comes on |
|
Dome light switch off and map light switch RH on |
Map light RH comes on |
|
|
Map light switch LH and RH off and dome light switch on |
Map light LH and RH come on |
|
|
Battery positive (+) → 14 (+B1) Battery negative (-) → 1 (DOOR) |
Map light switch LH and RH off and door linked switch on |
Map light LH and RH come on |
|
Map light switch LH and RH off and door linked switch off |
Map light LH and RH do not come on |
|
|
Battery positive (+) → 14 (+B1) Battery negative (-) → 2 (RLMP) |
Map light switch LH and RH off |
Map light LH and RH come on |
|
Map light switch LH and RH on |
Map light LH and RH do not come on |
If the result is not as specified, replace the map light (roof console box sub-assembly).
(b) Inspect the switch illumination and shift lever illumination.
(1) Apply battery voltage to the connector and check that the switch illumination and shift lever illumination come on.
OK:
|
Measurement Condition |
Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → 28 (ILLB) Battery negative (-) → 17 (LILL) |
Always |
Switch illumination and shift lever illumination come on |
If the result is not as specified, replace the map light (roof console box sub-assembly).
3. INSPECT MAP LIGHT (ROOF CONSOLE BOX SUB-ASSEMBLY) (for TMMK Made Normal Roof without Door Linked Switch)
|
*a |
Component without harness connected (Map Light (Roof Console Box Sub-assembly)) |
(a) Inspect the map light LH and map light RH.
(1) Apply battery voltage to the connector and check that the map light LH and map light RH come on.
OK:
|
Measurement Condition |
Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → 10 (+B1) Battery negative (-) → 11 (GND) |
Map light switch LH on |
Map light LH comes on |
|
Map light switch RH on |
Map light RH comes on |
If the result is not as specified, replace the map light (roof console box sub-assembly).
4. INSPECT MAP LIGHT (ROOF CONSOLE BOX SUB-ASSEMBLY) (for TMMK Made Normal Roof with Door Linked Switch)
|
*a |
Component without harness connected (Map Light (Roof Console Box Sub-assembly)) |
(a) Inspect the map light LH and map light RH.
(1) Apply battery voltage to the connector and check that the map light LH and map light RH come on.
OK:
|
Measurement Condition |
Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → 10 (+B1) Battery negative (-) → 11 (GND) |
Dome light switch off and map light switch LH on |
Map light LH comes on |
|
Dome light switch off and map light switch RH on |
Map light RH comes on |
|
|
Map light switch LH and RH off and dome light switch on |
Map light LH and RH come on |
|
|
Battery positive (+) → 10 (+B1) Battery negative (-) → 1 (DOOR) |
Map light switch LH and RH off and door linked switch on |
Map light LH and RH come on |
|
Map light switch LH and RH off and door linked switch off |
Map light LH and RH do not come on |
|
|
Battery positive (+) → 10 (+B1) Battery negative (-) → 2 (RLMP) |
Map light switch LH and RH off |
Map light LH and RH come on |
|
Map light switch LH and RH on |
Map light LH and RH do not come on |
If the result is not as specified, replace the map light (roof console box sub-assembly).
(b) Inspect the switch illumination and shift lever illumination.
(1) Apply battery voltage to the connector and check that the switch illumination and shift lever illumination come on.
OK:
|
Measurement Condition |
Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → 20 (ILLB) Battery negative (-) → 13 (LILL) |
Always |
Switch illumination and shift lever illumination come on |
If the result is not as specified, replace the map light (roof console box sub-assembly).
5. INSPECT MAP LIGHT (ROOF CONSOLE BOX SUB-ASSEMBLY) (for TMMK Made except Normal Roof)
|
*a |
Component without harness connected (Map Light (Roof Console Box Sub-assembly)) |
(a) Inspect the map light LH and map light RH.
(1) Apply battery voltage to the connector and check that the map light LH and map light RH come on.
OK:
|
Measurement Condition |
Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → 14 (+B1) Battery negative (-) → 15 (GND) |
Dome light switch off and map light switch LH on |
Map light LH comes on |
|
Dome light switch off and map light switch RH on |
Map light RH comes on |
|
|
Map light switch LH and RH off and dome light switch on |
Map light LH and RH come on |
|
|
Battery positive (+) → 14 (+B1) Battery negative (-) → 1 (DOOR) |
Map light switch LH and RH off and door linked switch on |
Map light LH and RH come on |
|
Map light switch LH and RH off and door linked switch off |
Map light LH and RH do not come on |
|
|
Battery positive (+) → 14 (+B1) Battery negative (-) → 2 (RLMP) |
Map light switch LH and RH off |
Map light LH and RH come on |
|
Map light switch LH and RH on |
Map light LH and RH do not come on |
If the result is not as specified, replace the map light (roof console box sub-assembly).
(b) Inspect the switch illumination and shift lever illumination.
(1) Apply battery voltage to the connector and check that the switch illumination and shift lever illumination come on.
OK:
|
Measurement Condition |
Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → 28 (ILLB) Battery negative (-) → 17 (LILL) |
Always |
Switch illumination and shift lever illumination come on |
If the result is not as specified, replace the map light (roof console box sub-assembly).
|
|