- Side television camera assembly LH
- Side television camera assembly RH
| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014V52 |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - 10/2020] |
| Title: LIGHTING (EXT): SIDE TURN SIGNAL LIGHT ASSEMBLY: REMOVAL; 2018 - 2020 MY Camry [06/2017 - 10/2020] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during side turn signal light assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
|
Side television camera view adjustment |
Panoramic view monitor system |
|
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE OUTER MIRROR (for Type A)
Click here
![2018 - 2024 MY Camry [06/2017 - ]; MIRROR (EXT): OUTER REAR VIEW MIRROR GLASS: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE OUTER MIRROR COVER WITH OUTER MIRROR HOLE COVER (for Type A)
w/o Panoramic View Monitor System:
Click here
3. REMOVE OUTER MIRROR COVER (for Type A)
Click here
4. REMOVE OUTER MIRROR HOLE COVER WITH SIDE TELEVISION CAMERA ASSEMBLY (for Type A)
w/ Panoramic View Monitor System:
Click here
5. REMOVE OUTER MIRROR (for Type B)
Click here
6. REMOVE OUTER MIRROR COVER (for Type B)
Click here
7. REMOVE VISOR HOUSING (for Type B)
Click here
8. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY
(a) for Type A:
|
(1) Disengage the 2 claws. |
|
|
(2) Disengage the 2 guides to separate the side turn signal light assembly. |
|
|
(3) Disconnect the connector to remove the side turn signal light assembly. |
|
(b) for Type B:
|
(1) Disconnect the connector to remove the side turn signal light assembly. |
|
|
|