| Last Modified: 06-03-2026 | 6.11:8.1.0 | Doc ID: RM1000000014UZZ |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - ] |
| Title: LIGHTING (INT): INSIDE HANDLE LIGHT: INSPECTION; 2018 - 2024 MY Camry [06/2017 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT INSIDE HANDLE ILLUMINATION LIGHT LH (NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH)
|
*a |
Component without harness connected (Inside Handle Illumination Light LH (No. 1 Interior Illumination Light Assembly LH)) |
(a) Apply battery voltage to the connector and check that the inside handle illumination light LH comes on.
OK
|
Measurement Condition |
Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → 2 (+) Battery negative (-) → 1 (-) |
Always |
Inside handle illumination light LH comes on |
If the result is not as specified, replace the inside handle illumination light LH (No. 1 interior illumination light assembly LH).
2. INSPECT INSIDE HANDLE ILLUMINATION LIGHT RH (NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH)
|
*a |
Component without harness connected (Inside Handle Illumination Light RH (No. 1 Interior Illumination Light Assembly RH)) |
(a) Apply battery voltage to the connector and check that the inside handle illumination light RH comes on.
OK
|
Measurement Condition |
Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → 2 (+) Battery negative (-) → 1 (-) |
Always |
Inside handle illumination light RH comes on |
If the result is not as specified, replace the inside handle illumination light RH (No. 1 interior illumination light assembly RH).
|
|