Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014US9
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 - 10/2020]
Title: EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION; 2018 - 2020 MY Camry [06/2017 - 10/2020]

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

When the rear bumper is damaged or deformed due to an accident or contact with other objects, etc., or the bumper installation area on the body is repaired, it is necessary to perform ultrasonic sensor detection angle measurement.

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM: CALIBRATION

PROCEDURE

1. INSTALL REAR BUMPER ASSEMBLY

(a) w/ Intuitive Parking Assist System:

(1) Connect the connector.

(b) Engage the 2 guides and 4 claws as shown in the illustration.

Install in this Direction

(c) Engage the 6 claws as shown in the illustration.

Install in this Direction

HINT:

Use the same procedure for the RH side and LH side.

(d) Install the 2 screws.

(e) for Single Type:

(1) Install the rear bumper assembly with the 11 clips.

(f) for Dual Type:

(1) Install the rear bumper assembly with the 10 clips.

2. INSTALL REAR COMBINATION LIGHT COVER LH

Click here 2018 - 2024 MY Camry [03/2017 -        ]; LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION+

3. INSTALL REAR COMBINATION LIGHT COVER RH

HINT:

Use the same procedure as for the LH side.