| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014URP |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - 09/2019] |
| Title: EXTERIOR PANELS / TRIM: FRONT BUMPER: DISASSEMBLY; 2018 - 2019 MY Camry [06/2017 - 09/2019] | ||
DISASSEMBLY
PROCEDURE
1. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Pre-collision System)
Click here
![2018 - 2020 MY Camry [03/2017 - 10/2020]; CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (for Bar Type Radiator Grille)
|
(a) Remove the 2 screws. |
|
(b) Disengage the 2 guides to remove the front bumper extension mounting bracket as shown in the illustration.
|
Remove in this Direction |
3. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (for Mesh Type Radiator Grille)
|
(a) Remove the 2 screws. |
|
(b) Disengage the 2 guides to remove the front bumper extension mounting bracket as shown in the illustration.
|
|
Remove in this Direction |
4. REMOVE FRONT BUMPER PAD LH (for Bar Type Radiator Grille)
|
(a) Disengage the 2 claws and guide to remove the front bumper pad LH. |
|
5. REMOVE FRONT BUMPER PAD RH (for Bar Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
6. REMOVE FRONT BUMPER PAD LH (for Mesh Type Radiator Grille)
|
(a) Disengage the 2 claws and guide to remove the front bumper pad LH. |
|
7. REMOVE FRONT BUMPER PAD RH (for Mesh Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
8. REMOVE FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
for Bar Type Radiator Grille:
Click here
9. REMOVE FRONT BUMPER COVER INSERT (w/ Panoramic View Monitor System)
|
(a) for Mesh Type Radiator Grille: (1) Disengage the 2 claws to remove the front bumper cover insert. |
|
10. REMOVE FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
for Mesh Type Radiator Grille:
Click here
11. REMOVE FRONT CENTER ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
Click here
12. REMOVE FRONT CORNER ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
Click here
13. REMOVE FRONT CENTER ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
for Bar Type Radiator Grille:
Click here
14. REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
Click here
15. REMOVE NO. 4 ENGINE ROOM WIRE (w/ Intuitive Parking Assist System)
(a) for Bar Type Radiator Grille:
(1) Disengage the 10 clamps to remove the No. 4 engine room wire.
(b) for Mesh Type Radiator Grille:
(1) Disengage the 12 clamps to remove the No. 4 engine room wire.
16. REMOVE FRONT BUMPER HOLE COVER LH (for Bar Type Radiator Grille)
(a) w/ Cover:
|
*a |
Hook |
|
|
Remove in this Direction |
(1) Disengage the 2 claws as shown in the illustration.
(2) Disengage the hook to remove the front bumper hole cover LH.
17. REMOVE FRONT BUMPER HOLE COVER LH (for Mesh Type Radiator Grille)
(a) w/ Cover:
|
*a |
Hook |
|
|
Remove in this Direction |
(1) Disengage the 5 claws as shown in the illustration.
(2) Disengage the hook to remove the front bumper hole cover LH.
18. REMOVE FRONT BUMPER HOLE COVER RH (for Mesh Type Radiator Grille)
w/ Cover:
HINT:
Use the same procedure as for the LH side.
19. REMOVE HOOD TO FRONT END PANEL SEAL
|
(a) Disengage the 6 clips. |
|
(b) Separate the double-sided tape and disengage the guide to remove the hood to front end panel seal.
|
Double-sided Tape |
20. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY
|
(a) Remove the 2 screws. |
|
|
(b) Disengage the 2 claws and guide to remove the radiator grille emblem assembly. |
|
21. REMOVE RADIATOR GRILLE SIDE MOULDING LH (for Bar Type Radiator Grille)
|
(a) Remove the screw. |
|
(b) Disengage the 3 claws to remove the radiator grille side moulding LH as shown in the illustration.
|
|
Remove in this Direction |
22. REMOVE RADIATOR GRILLE SIDE MOULDING RH (for Bar Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
23. REMOVE RADIATOR GRILLE (for Bar Type Radiator Grille)
|
(a) Remove the 2 clips. |
|
|
(b) Remove the 6 screws and radiator grille. |
|
24. REMOVE RADIATOR GRILLE (for Mesh Type Radiator Grille)
|
(a) Remove the 2 clips. |
|
|
(b) Remove the 10 screws and radiator grille. |
|
25. REMOVE LOWER RADIATOR GRILLE MOULDING (for Mesh Type Radiator Grille)
|
(a) Remove the 2 screws. |
|
(b) Disengage the 16 claws to remove the lower radiator grille moulding.
26. REMOVE LOWER RADIATOR GRILLE MOULDING LH (for Mesh Type Radiator Grille)
|
(a) Disengage the 10 claws to remove the lower radiator grille moulding LH. |
|
27. REMOVE LOWER RADIATOR GRILLE MOULDING RH (for Mesh Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
28. REMOVE FOG LIGHT COVER LH (for Mesh Type Radiator Grille)
|
(a) Disengage the 6 claws to remove the fog light cover LH. |
|
29. REMOVE FOG LIGHT COVER RH (for Mesh Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
30. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Bar Type Radiator Grille)
|
(a) Remove the 6 screws. |
|
(b) Disengage the 23 claws to remove the lower radiator grille sub-assembly.
31. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Mesh Type Radiator Grille)
|
(a) Remove the 2 screws. |
|
(b) Disengage the 18 claws to remove the lower radiator grille sub-assembly.
32. REMOVE RADIATOR GRILLE SIDE MOULDING LH (for Mesh Type Radiator Grille)
|
(a) Remove the 2 clips. |
|
|
(b) Disengage the 2 claws and 2 guides to remove the radiator grille side moulding LH. |
|
33. REMOVE RADIATOR GRILLE SIDE MOULDING RH (for Mesh Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
34. REMOVE PIN HOLD CLIP
(a) Disengage the 4 claws to remove the 2 pin hold clips as shown in the illustration.
|
|
Remove in this Direction |
HINT:
Use the same procedure for the RH side and LH side.
35. REMOVE FRONT FENDER LINER RETAINER
(a) Remove the 2 front fender liner retainers as shown in the illustration.
|
|
Remove in this Direction |
HINT:
Use the same procedure for the RH side and LH side.
36. REMOVE NO. 2 FRONT BUMPER ENERGY ABSORBER
(a) Disengage the 2 guides to remove the No. 2 front bumper energy absorber as shown in the illustration.
|
|
Remove in this Direction |
37. REMOVE FRONT BUMPER ENERGY ABSORBER
(a) Disengage the 4 guides to remove the front bumper energy absorber as shown in the illustration.
|
|
Remove in this Direction |
38. REMOVE FRONT BUMPER REINFORCEMENT
(a) Remove the headlight assembly LH.
Click here
(b) Remove the headlight assembly RH.
HINT:
Use the same procedure as for the LH side.
|
(c) Disengage the 5 clamps. |
|
(d) Remove the 8 bolts and front bumper reinforcement.
39. REMOVE FRONT BUMPER SIDE RETAINER LH
|
(a) Remove the bolt. |
|
(b) Disengage the 2 clips to remove the front bumper side retainer LH as shown in the illustration.
|
|
Remove in this Direction |
40. REMOVE FRONT BUMPER SIDE RETAINER RH
HINT:
Use the same procedure as for the LH side.
|
|