Title: SLIDING ROOF / CONVERTIBLE: PANORAMIC MOON ROOF SYSTEM: B2345; Motor Control Relay Stuck ON; 2018 - 2024 MY Camry [06/2017 - ]
DTC
B2345
Motor Control Relay Stuck ON
DESCRIPTION
This DTC will be stored if the operation of the sliding roof or roof sunshade is suspended and a pulse input of 10 Hz or more is detected when the motor relay is off.
Sliding Roof
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
B2345
Motor Control Relay Stuck ON
Position failure (When the sliding roof ECU (sliding roof drive gear assembly) enters fail-safe mode due to a problem with the gear position)
If the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) must be initialized.
Click here
DTC B2345 is stored in the sliding roof ECU (sliding roof drive gear assembly) and roof sunshade ECU (sliding roof drive gear assembly).
PROCEDURE
1.
CHECK FOR DTC
(a) Clear the DTCs.
Click here
Body Electrical > Sliding Roof > Clear DTCs
Body Electrical > Sliding Sunshade > Clear DTCs
(b) Check for DTCs.
Click here
Body Electrical > Sliding Roof > Trouble Codes
Body Electrical > Sliding Sunshade > Trouble Codes
OK:
DTC B2345 is not output.
OK
USE SIMULATION METHOD TO CHECK
NG
2.
CHECK DTC OUTPUT
(a) Check the parts from which this DTC has been output.