Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014UP3
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 -           ]
Title: LIGHTING (INT): LIGHTING SYSTEM: DATA LIST / ACTIVE TEST; 2018 - 2024 MY Camry [06/2017 -        ]

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Main Body / Data List.

(e) Read the Data List according to the display on the Techstream.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

ACC SW

Ignition switch ACC signal

OFF or ON

OFF: Ignition switch off

ON: Ignition switch ACC

"ON" is also displayed for this item when the ignition switch is ON.

IG SW

Ignition switch ON signal

OFF or ON

OFF: Ignition switch off

ON: Ignition switch ON

"OFF" is also displayed for this item when the ignition switch is ACC.

RR Door Courtesy SW

Rear door courtesy light switch assembly RH signal

OFF or ON

OFF: Rear door RH closed

ON: Rear door RH open

-

RL Door Courtesy SW

Rear door courtesy light switch assembly LH signal

OFF or ON

OFF: Rear door LH closed

ON: Rear door LH open

-

FR Door Lock Pos

Front door RH unlock detection switch signal

LOCK or UNLOCK

LOCK: Front door RH locked

UNLOCK: Front door RH unlocked

-

FR Door Courtesy SW

Front door courtesy light switch assembly RH signal

OFF or ON

OFF: Front door RH closed

ON: Front door RH open

-

FL Door Lock Pos

Front door LH unlock detection switch signal

LOCK or UNLOCK

LOCK: Front door LH locked

UNLOCK: Front door LH unlocked

-

FL Door Courtesy SW

Front door courtesy light switch assembly LH signal

OFF or ON

OFF: Front door LH closed

ON: Front door LH open

-

RR-Door Lock Pos SW

Rear door RH unlock detection switch signal

OFF or ON

OFF: Rear door RH locked

ON: Rear door RH unlocked

-

RL-Door Lock Pos SW

Rear door LH unlock detection switch signal

OFF or ON

OFF: Rear door LH locked

ON: Rear door LH unlocked

-

Luggage Courtesy SW

Luggage compartment door courtesy switch signal

OFF or ON

OFF: Luggage compartment door closed

ON: Luggage compartment door open

-

Interior Light Control

Operation of the illuminated entry system

OFF or ON

Customized value is displayed

-

I/L ON W/Door Key Unlock

Function that turns on the interior lights when the doors are unlocked

OFF or ON

Customized value is displayed

-

Lighting Time

Lighting time of the delay control function (illuminated entry system)

15 s, 7.5 s or 30 s

Customized value is displayed

-

Room Light when Aprchd

Function that turns on the interior lights when a key enters any actuation area*1

OFF or ON

Customized value is displayed

-

Inside Foot Light

Function that turns on the footwell light (No. 1 interior illumination light assembly)*2

OFF or ON

Customized value is displayed

-

I/L when ACC OFF

Function that turns on the interior lights when the ignition switch is turned from ACC or ON to off

OFF or ON

Customized value is displayed

-

Light Control

Function that dims the following lights when the ignition switch is ON and the shift lever is moved to any position other than P:

  • Footwell light (No. 1 interior illumination light assembly)*2
  • Inside handle illumination light (No. 1 interior illumination light assembly)*3
  • Instrument panel ambient illumination light (Instrument panel light assembly)*4

OFF or ON

Customized value is displayed

-

Interior Illumination Light

Function that turns on the following lights:

  • Inside handle illumination light (No. 1 interior illumination light assembly)*3
  • Instrument panel ambient illumination light (Instrument panel light assembly)*4

OFF or ON

Customized value is displayed

-
  • *1: w/ Smart Key System
  • *2: w/ Footwell Light
  • *3: w/ Inside Handle Illumination Light
  • *4: w/ Instrument Panel Ambient Illumination Light

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / (desired system) / Active Test.

(e) Perform the Active Test according to the display on the Techstream.

Body Electrical > Main Body > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Illuminated Entry System

Turns on the lights that are controlled by the illuminated entry system*1

OFF or ON

w/ Room Light (for LED Type):

Perform the Active Test with the door linked switch of the map light (roof console box sub-assembly) on and switches of the spot light assembly LH and RH off.

w/ Room Light (for Bulb Type):

Perform the Active Test with switch of the room light assembly in the DOOR position.

Fr Foot Light

Footwell light (No. 1 interior illumination light assembly)*2

OFF or ON

Preconditions for using the Active Test to check dimmer controlled illumination:

  • Ignition switch ON
  • Shift lever is in any position other than P

Relay for Interior Light Auto Cut Function

DOME CUT relay

OFF or ON

When performing this Active Test, turn all the interior lights on.

  • OFF: DOME CUT relay on (interior lights turn on)
  • ON: DOME CUT relay off (interior lights turn off)

Interior Illumination Light1

Instrument panel ambient illumination light (Instrument panel light assembly)*3

OFF or ON

Preconditions for using the Active Test to check dimmer controlled illumination:

  • Ignition switch ON
  • Shift lever is in any position other than P

Interior Illumination Light2

Inside handle illumination light (No. 1 interior illumination light assembly)*4

OFF or ON

Preconditions for using the Active Test to check dimmer controlled illumination:

  • Ignition switch ON
  • Shift lever is in any position other than P
  • *1: Refer to System Description for the lights that are controlled by the illuminated entry system.

    Click here 2018 - 2019 MY Camry [06/2017 - 09/2019]; LIGHTING (INT): LIGHTING SYSTEM: SYSTEM DESCRIPTION 2020 - 2024 MY Camry [09/2019 -        ]; LIGHTING (INT): LIGHTING SYSTEM: SYSTEM DESCRIPTION

  • *2: w/ Footwell Light
  • *3: w/ Instrument Panel Ambient Illumination Light
  • *4: w/ Inside Handle Illumination Light

Body Electrical > Smart Key > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Power/Engine SW Light

Engine switch illumination*

OFF or ON

-
  • *: w/ Smart Key System