Last Modified: 06-03-2026 6.11:8.1.0 Doc ID: RM1000000014UCB
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 -           ]
Title: 2GR-FKS (ENGINE CONTROL): HEATED OXYGEN SENSOR: INSPECTION; 2018 - 2024 MY Camry [06/2017 -        ]

INSPECTION

PROCEDURE

1. INSPECT HEATED OXYGEN SENSOR (for Bank 1)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection

Condition

Specified Condition

1 (HT1B) - 2 (+B)

20°C (68°F)

5 to 10 Ω

1 (HT1B) - 4 (E2)

Always

10 kΩ or higher

If the result is not as specified, replace the heated oxygen sensor.

*a

Component without harness connected

(Heated Oxygen Sensor)

2. INSPECT HEATED OXYGEN SENSOR (for Bank 2)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection

Condition

Specified Condition

1 (HT2B) - 2 (+B)

20°C (68°F)

5 to 10 Ω

1 (HT2B) - 4 (E2)

Always

10 kΩ or higher

If the result is not as specified, replace the heated oxygen sensor.

*a

Component without harness connected

(Heated Oxygen Sensor)