| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014UAV |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - ] |
| Title: 2GR-FKS (ENGINE CONTROL): CAMSHAFT OIL CONTROL SOLENOID: REMOVAL; 2018 - 2024 MY Camry [06/2017 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE V-BANK COVER SUB-ASSEMBLY
Click here
![2018 MY Camry [06/2017 - 08/2018]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 2)
|
(a) Disconnect the camshaft timing oil control solenoid assembly connector. |
|
(b) Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.
NOTICE:
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
(c) Remove the O-ring from the camshaft timing oil control solenoid assembly.
NOTICE:
- If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
- Do not drop the O-ring into the timing chain cover assembly.
3. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 1)
|
(a) Disconnect the camshaft timing oil control solenoid assembly connector. |
|
(b) Disengage the clamp to disconnect the engine wire.
(c) Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.
NOTICE:
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
(d) Remove the O-ring from the camshaft timing oil control solenoid assembly.
NOTICE:
- If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
- Do not drop the O-ring into the timing chain cover assembly.
4. REMOVE FRONT FENDER APRON SEAL RH
Click here
5. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 1)
|
(a) Disconnect the camshaft timing oil control solenoid assembly connector. |
|
(b) Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.
NOTICE:
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
(c) Remove the O-ring from the camshaft timing oil control solenoid assembly.
NOTICE:
- If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
- Do not drop the O-ring into the timing chain cover assembly.
6. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
Click here
7. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2)
|
(a) Disconnect the camshaft timing oil control solenoid assembly connector. |
|
(b) Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.
NOTICE:
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
(c) Remove the O-ring from the camshaft timing oil control solenoid assembly.
NOTICE:
- If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
- Do not drop the O-ring into the timing chain cover assembly.
|
|