Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014TMB
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 - 10/2020]
Title: PARK ASSIST / MONITORING: TELEVISION CAMERA (for Side): REMOVAL; 2018 - 2020 MY Camry [06/2017 - 10/2020]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during side television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

  • Side television camera assembly LH
  • Side television camera assembly RH

Side television camera view adjustment

Panoramic view monitor system

2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: CALIBRATION

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE OUTER MIRROR

Click here 2018 - 2024 MY Camry [06/2017 -        ]; MIRROR (EXT): OUTER REAR VIEW MIRROR GLASS: REMOVAL+

2. REMOVE OUTER MIRROR COVER

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; MIRROR (EXT): OUTER REAR VIEW MIRROR COVER: REMOVAL+

3. REMOVE OUTER MIRROR HOLE COVER WITH SIDE TELEVISION CAMERA ASSEMBLY

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; MIRROR (EXT): OUTER REAR VIEW MIRROR COVER: REMOVAL+

4. REMOVE SIDE TELEVISION CAMERA ASSEMBLY

(a) Disengage the 2 guides.

(b) Remove the screw.

(c) Disengage the claw to remove the side television camera assembly from the outer mirror hole cover assembly.