Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014TM8
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 - 10/2020]
Title: PARK ASSIST / MONITORING: TELEVISION CAMERA (for Front): REMOVAL; 2018 - 2020 MY Camry [06/2017 - 10/2020]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Front television camera assembly

Front television camera view adjustment

Panoramic view monitor system

2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: CALIBRATION

Front bumper assembly
  • Measurement of ultrasonic sensor detection angle
  • Ultrasonic sensor detection angle registration
  • Intelligent clearance sonar system
  • Intuitive parking assist system

2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM: CALIBRATION

PROCEDURE

1. REMOVE FRONT BUMPER ASSEMBLY

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL

2. REMOVE FRONT TELEVISION CAMERA ASSEMBLY (for Bar Type Radiator Grille)

(a) Remove the 2 screws.

(b) Disengage the 2 guides to remove the front television camera assembly.

3. REMOVE FRONT BUMPER COVER INSERT (for Mesh Type Radiator Grille)

Click here 2018 - 2019 MY Camry [06/2017 - 09/2019]; EXTERIOR PANELS / TRIM: FRONT BUMPER: DISASSEMBLY+ 2020 MY Camry [09/2019 - 10/2020]; EXTERIOR PANELS / TRIM: FRONT BUMPER: DISASSEMBLY+

4. REMOVE FRONT TELEVISION CAMERA ASSEMBLY (for Mesh Type Radiator Grille)

(a) Remove the 3 screws.

(b) Disengage the 2 guides to remove the front television camera assembly.