Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014TKB
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 - 08/2018]
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Speaker Circuit; 2018 MY Camry [06/2017 - 08/2018]

Speaker Circuit

DESCRIPTION

for 6 Speakers

  • If there is a short in a speaker circuit, the radio and display receiver assembly detects it and stops output to the speakers.

    Thus sound cannot be heard from the speakers even if there is no malfunction in the radio and display receiver assembly, DCM (telematics transceiver)* or speakers.

for 9 Speakers

  • If there is a short in a speaker circuit, the stereo component amplifier assembly detects it and stops output to the speakers.

    Thus sound cannot be heard from the speakers even if there is no malfunction in the stereo component amplifier assembly, DCM (telematics transceiver)* or speakers.

  • *: w/ Manual (SOS) Switch

WIRING DIAGRAM

for 6 Speakers
for 9 Speakers

CAUTION / NOTICE / HINT

NOTICE:

  • Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.

    Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: PRECAUTION

  • Before replacing the DCM (telematics transceiver), refer to Registration.

    Click here 2018 - 2019 MY Camry [03/2017 - 09/2019]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function): REGISTRATION

PROCEDURE

1.

CHECK MODEL

(a) Choose the model to be inspected.

Result

Proceed to

for 6 Speakers

A

for 9 Speakers

B

B

GO TO STEP 10

A

2.

CHECK SPEAKER (OPERATION CHECK)

(a) Enter the "System Check Mode" screen. Refer to Check Speaker in Operation Check.

Click here 2018 - 2019 MY Camry [06/2017 - 09/2019]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: OPERATION CHECK

(b) Perform the operation check above and determine the speaker that is not operating.

Not Operating Speaker

Proceed to

Front No. 1 speaker assembly or front No. 2 speaker assembly

(w/o Manual (SOS) Switch)

A

Front No. 1 speaker assembly or front No. 2 speaker assembly

(w/ Manual (SOS) Switch)

B

Rear speaker assembly

C

HINT:

If sound cannot be heard from any speaker, inspect all of them.

B

GO TO STEP 4

C

GO TO STEP 8

A

3.

CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)

(a) Disconnect the K4 radio and display receiver assembly connector.

(b) Disconnect the N1 and O1 front No. 1 speaker assembly connectors.

(c) Disconnect the K7 and K8 front No. 2 speaker assembly connectors.

(d) Measure the resistance according to the value (s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

K4-1 (FR+) - K7-4 (TWR+)

Always

Below 1 Ω

K4-6 (FR-) - K7-2 (TWR-)

Always

Below 1 Ω

K4-2 (FL+) - K8-4 (TWL+)

Always

Below 1 Ω

K4-7 (FL-) - K8-2 (TWL-)

Always

Below 1 Ω

N1-2 - K7-3 (+)

Always

Below 1 Ω

N1-1 - K7-1 (-)

Always

Below 1 Ω

O1-2 - K8-3 (+)

Always

Below 1 Ω

O1-1 - K8-1 (-)

Always

Below 1 Ω

K4-1 (FR+) or K7-4 (TWR+) - Body ground

Always

10 kΩ or higher

K4-6 (FR-) or K7-2 (TWR-) - Body ground

Always

10 kΩ or higher

K4-2 (FL+) or K8-4 (TWL+) - Body ground

Always

10 kΩ or higher

K4-7 (FL-) or K8-2 (TWL-) - Body ground

Always

10 kΩ or higher

N1-2 or K7-3 (+) - Body ground

Always

10 kΩ or higher

N1-1 or K7-1 (-) - Body ground

Always

10 kΩ or higher

O1-2 or K8-3 (+) - Body ground

Always

10 kΩ or higher

O1-1 or K8-1 (-) - Body ground

Always

10 kΩ or higher

OK

GO TO STEP 6

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.

CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - DCM (TELEMATICS TRANSCEIVER) - FRONT NO. 1 SPEAKER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)

(a) Disconnect the K4 radio and display receiver assembly connector.

(b) Disconnect the N1 and O1 front No. 1 speaker assembly connectors.

(c) Disconnect the K7 and K8 front No. 2 speaker assembly connectors.

(d) Disconnect the K12 DCM (telematics transceiver) connector.

(e) Measure the resistance according to the value (s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

K4-1 (FR+) - K12-2 (SPI+)

Always

Below 1 Ω

K4-6 (FR-) - K12-3 (SPI-)

Always

Below 1 Ω

K12-5 (SPO+) - K7-4 (TWR+)

Always

Below 1 Ω

K12-6 (SPO-) - K7-2 (TWR-)

Always

Below 1 Ω

K4-2 (FL+) - K8-4 (TWL+)

Always

Below 1 Ω

K4-7 (FL-) - K8-2 (TWL-)

Always

Below 1 Ω

N1-2 - K7-3 (+)

Always

Below 1 Ω

N1-1 - K7-1 (-)

Always

Below 1 Ω

O1-2 - K8-3 (+)

Always

Below 1 Ω

O1-1 - K8-1 (-)

Always

Below 1 Ω

K4-1 (FR+) or K12-2 (SPI+) - Body ground

Always

10 kΩ or higher

K4-6 (FR-) or K12-3 (SPI-) - Body ground

Always

10 kΩ or higher

K4-2 (FL+) or K8-4 (TWL+) - Body ground

Always

10 kΩ or higher

K4-7 (FL-) or K8-2 (TWL-) - Body ground

Always

10 kΩ or higher

K12-5 (SPO+) or K7-4 (TWR+) - Body ground

Always

10 kΩ or higher

K12-6 (SPO-) or K7-2 (TWR-) - Body ground

Always

10 kΩ or higher

N1-2 or K7-3 (+) - Body ground

Always

10 kΩ or higher

N1-1 or K7-1 (-) - Body ground

Always

10 kΩ or higher

O1-2 or K8-3 (+) - Body ground

Always

10 kΩ or higher

O1-1 or K8-1 (-) - Body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK

5.

INSPECT DCM (TELEMATICS TRANSCEIVER)

(a) Remove the DCM (telematics transceiver).

Click here 2018 - 2019 MY Camry [03/2017 - 09/2019]; CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

2 (SPI+) - 5 (SPO+)

Always

Below 1 Ω

3 (SPI-) - 6 (SPO-)

Always

Below 1 Ω

2 (SPI+) - 3 (SPI-)

Always

10 kΩ or higher

5 (SPO+) - 6 (SPO-)

Always

10 kΩ or higher

2 (SPI+) or 5 (SPO+) - Body ground

Always

10 kΩ or higher

3 (SPI-) or 6 (SPO-) - Body ground

Always

10 kΩ or higher

*a

Component without harness connected

(DCM (Telematics Transceiver))

NG

REPLACE DCM (TELEMATICS TRANSCEIVER)

OK

6.

INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

(a) Remove the front No. 1 speaker assembly.

Click here 2018 - 2019 MY Camry [03/2017 - 09/2019]; AUDIO / VIDEO: FRONT DOOR SPEAKER: REMOVAL

(b) Inspect the front No. 1 speaker assembly.

Click here 2018 - 2024 MY Camry [06/2017 -        ]; AUDIO / VIDEO: FRONT DOOR SPEAKER: INSPECTION

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

OK

7.

REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

(a) Remove the front No. 2 speaker assembly.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: REMOVAL

(b) Inspect the front No. 2 speaker assembly.

Click here 2018 - 2024 MY Camry [06/2017 -        ]; AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: INSPECTION

OK:

Malfunction disappears.

OK

END

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

8.

CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - REAR SPEAKER ASSEMBLY)

(a) Disconnect the K4 radio and display receiver assembly connector.

(b) Disconnect the Q1 and P1 rear speaker assembly connectors.

(c) Measure the resistance according to the value (s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

K4-4 (RR+) - P1-1

Always

Below 1 Ω

K4-9 (RR-) - P1-2

Always

Below 1 Ω

K4-3 (RL+) - Q1-1

Always

Below 1 Ω

K4-8 (RL-) - Q1-2

Always

Below 1 Ω

K4-4 (RR+) or P1-1 - Body ground

Always

10 kΩ or higher

K4-9 (RR-) or P1-2 - Body ground

Always

10 kΩ or higher

K4-3 (RL+) or Q1-1 - Body ground

Always

10 kΩ or higher

K4-8 (RL-) or Q1-2 - Body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK

9.

INSPECT REAR SPEAKER ASSEMBLY

(a) Remove the rear speaker assembly.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; AUDIO / VIDEO: REAR DOOR SPEAKER: REMOVAL

(b) Inspect the rear speaker assembly.

Click here 2018 MY Camry [06/2017 - 08/2018]; AUDIO / VIDEO: REAR DOOR SPEAKER: INSPECTION

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPLACE REAR SPEAKER ASSEMBLY

10.

CHECK SPEAKER (OPERATION CHECK)

(a) Enter the "System Check Mode" screen. Refer to Check Speaker in Operation Check.

Click here 2018 - 2019 MY Camry [06/2017 - 09/2019]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: OPERATION CHECK

(b) Perform the operation check above and determine the speaker that is not operating.

Not Operating Speaker

Proceed to

Front No. 1 speaker assembly or front No. 3 speaker assembly

A

Front No. 2 speaker assembly

(w/ Manual (SOS) Switch)

B

Front No. 2 speaker assembly

(w/o Manual (SOS) Switch)

C

Rear speaker assembly

D

Rear stereo component speaker assembly

E

HINT:

If sound cannot be heard from any speaker, inspect all of them.

B

GO TO STEP 14

C

GO TO STEP 17

D

GO TO STEP 19

E

GO TO STEP 21

A

11.

CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY - FRONT NO. 3 SPEAKER ASSEMBLY)

(a) Disconnect the K14 stereo component amplifier assembly connector.

(b) Disconnect the N1 and O1 front No. 1 speaker assembly connectors.

(c) Disconnect the K109 and K110 front No. 3 speaker assembly connectors.

(d) Measure the resistance according to the value (s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

K14-15 (FR+) - K109-4 (+TW)

Always

Below 1 Ω

K14-30 (FR-) - K109-2 (-TW)

Always

Below 1 Ω

K14-13 (FL+) - K110-4 (+TW)

Always

Below 1 Ω

K14-28 (FL-) - K110-2 (-TW)

Always

Below 1 Ω

N1-2 - K109-3 (+)

Always

Below 1 Ω

N1-1 - K109-1 (-)

Always

Below 1 Ω

O1-2 - K110-3 (+)

Always

Below 1 Ω

O1-1 - K110-1 (-)

Always

Below 1 Ω

K14-15 (FR+) or K109-4 (+TW) - Body ground

Always

10 kΩ or higher

K14-30 (FR-) or K109-2 (-TW) - Body ground

Always

10 kΩ or higher

K14-13 (FL+) or K110-4 (+TW) - Body ground

Always

10 kΩ or higher

K14-28 (FL-) or K110-2 (-TW) - Body ground

Always

10 kΩ or higher

N1-2 or K109-3 (+) - Body ground

Always

10 kΩ or higher

N1-1 or K109-1 (-) - Body ground

Always

10 kΩ or higher

O1-2 or K110-3 (+) - Body ground

Always

10 kΩ or higher

O1-1 or K110-1 (-) - Body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK

12.

INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

(a) Remove the front No. 1 speaker assembly.

Click here 2018 - 2019 MY Camry [03/2017 - 09/2019]; AUDIO / VIDEO: FRONT DOOR SPEAKER: REMOVAL

(b) Inspect the front No. 1 speaker assembly.

Click here 2018 - 2024 MY Camry [06/2017 -        ]; AUDIO / VIDEO: FRONT DOOR SPEAKER: INSPECTION

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

OK

13.

REPLACE FRONT NO. 3 SPEAKER ASSEMBLY

(a) Remove the front No. 3 speaker assembly.

Click here 2018 - 2024 MY Camry [06/2017 -        ]; AUDIO / VIDEO: PILLAR SPEAKER: REMOVAL

(b) Inspect the front No. 3 speaker assembly.

Click here 2018 - 2024 MY Camry [06/2017 -        ]; AUDIO / VIDEO: PILLAR SPEAKER: INSPECTION

OK:

Malfunction disappears.

OK

END

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

14.

CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - DCM (TELEMATICS TRANSCEIVER) - FRONT NO. 2 SPEAKER ASSEMBLY)

(a) Disconnect the K14 stereo component amplifier assembly connector.

(b) Disconnect the K94 and K95 front No. 2 speaker assembly connectors.

(c) Disconnect the K12 DCM (telematics transceiver) connector.

(d) Measure the resistance according to the value (s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

K14-14 (TWR+) - K12-2 (SPI+)

Always

Below 1 Ω

K14-29 (TWR-) - K12-3 (SPI-)

Always

Below 1 Ω

K12-5 (SPO+) - K94-2 (TWR+)

Always

Below 1 Ω

K12-6 (SPO-) - K94-1 (TWR-)

Always

Below 1 Ω

K14-12 (TWL+) - K95-2 (TWL+)

Always

Below 1 Ω

K14-27 (TWL-) - K95-1 (TWL-)

Always

Below 1 Ω

K14-14 (TWR+) or K12-2 (SPI+) - Body ground

Always

10 kΩ or higher

K14-29 (TWR-) or K12-3 (SPI-) - Body ground

Always

10 kΩ or higher

K14-12 (TWL+) or K95-2 (TWL+) - Body ground

Always

10 kΩ or higher

K14-27 (TWL-) or K95-1 (TWL-) - Body ground

Always

10 kΩ or higher

K12-5 (SPO+) or K94-2 (TWR+) - Body ground

Always

10 kΩ or higher

K12-6 (SPO-) or K94-1 (TWR-) - Body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK

15.

INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

(a) Remove the front No. 2 speaker assembly.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: REMOVAL

(b) Inspect the front No. 2 speaker assembly.

Click here 2018 - 2024 MY Camry [06/2017 -        ]; AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: INSPECTION

NG

REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

OK

16.

INSPECT DCM (TELEMATICS TRANSCEIVER)

(a) Remove the DCM (telematics transceiver).

Click here 2018 - 2019 MY Camry [03/2017 - 09/2019]; CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

2 (SPI+) - 5 (SPO+)

Always

Below 1 Ω

3 (SPI-) - 6 (SPO-)

Always

Below 1 Ω

2 (SPI+) - 3 (SPI-)

Always

10 kΩ or higher

5 (SPO+) - 6 (SPO-)

Always

10 kΩ or higher

2 (SPI+) or 5 (SPO+) - Body ground

Always

10 kΩ or higher

3 (SPI-) or 6 (SPO-) - Body ground

Always

10 kΩ or higher

*a

Component without harness connected

(DCM (Telematics Transceiver))

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPLACE DCM (TELEMATICS TRANSCEIVER)

17.

CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)

(a) Disconnect the K14 stereo component amplifier assembly connector.

(b) Disconnect the K94 and K95 front No. 2 speaker assembly connectors.

(c) Measure the resistance according to the value (s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

K14-14 (TWR+) - K94-2 (TWR+)

Always

Below 1 Ω

K14-29 (TWR-) - K94-1 (TWR-)

Always

Below 1 Ω

K14-12 (TWL+) - K95-2 (TWL+)

Always

Below 1 Ω

K14-27 (TWL-) - K95-1 (TWL-)

Always

Below 1 Ω

K14-14 (TWR+) or K94-2 (TWR+) - Body ground

Always

10 kΩ or higher

K14-29 (TWR-) or K94-1 (TWR-) - Body ground

Always

10 kΩ or higher

K14-12 (TWL+) or K95-2 (TWL+) - Body ground

Always

10 kΩ or higher

K14-27 (TWL-) or K95-1 (TWL-) - Body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK

18.

INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

(a) Remove the front No. 2 speaker assembly.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: REMOVAL

(b) Inspect the front No. 2 speaker assembly.

Click here 2018 - 2024 MY Camry [06/2017 -        ]; AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: INSPECTION

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

19.

CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - REAR SPEAKER ASSEMBLY)

(a) Disconnect the K14 stereo component amplifier assembly connector.

(b) Disconnect the P1 and Q1 rear speaker assembly connectors.

(c) Measure the resistance according to the value (s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

K14-11 (RR+) - P1-1

Always

Below 1 Ω

K14-26 (RR-) - P1-2

Always

Below 1 Ω

K14-9 (RL+) - Q1-1

Always

Below 1 Ω

K14-24 (RL-) - Q1-2

Always

Below 1 Ω

K14-11 (RR+) or P1-1 - Body ground

Always

10 kΩ or higher

K14-26 (RR-) or P1-2 - Body ground

Always

10 kΩ or higher

K14-9 (RL+) or Q1-1 - Body ground

Always

10 kΩ or higher

K14-24 (RL-) or Q1-2 - Body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK

20.

INSPECT REAR SPEAKER ASSEMBLY

(a) Remove the rear speaker assembly.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; AUDIO / VIDEO: REAR DOOR SPEAKER: REMOVAL

(b) Inspect the rear speaker assembly.

Click here 2018 MY Camry [06/2017 - 08/2018]; AUDIO / VIDEO: REAR DOOR SPEAKER: INSPECTION

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPLACE REAR SPEAKER ASSEMBLY

21.

CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - REAR STEREO COMPONENT SPEAKER ASSEMBLY)

(a) Disconnect the K14 stereo component amplifier assembly connector.

(b) Disconnect the R1 rear stereo component speaker assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

K14-10 (WF1+) - R1-4 (WF1+)

Always

Below 1 Ω

K14-25 (WF1-) - R1-3 (WF1-)

Always

Below 1 Ω

K14-8 (WF2+) - R1-2 (WF2+)

Always

Below 1 Ω

K14-23 (WF2-) - R1-1 (WF2-)

Always

Below 1 Ω

K14-10 (WF1+) or R1-4 (WF1+) - Body ground

Always

10 kΩ or higher

K14-25 (WF1-) or R1-3 (WF1-) - Body ground

Always

10 kΩ or higher

K14-8 (WF2+) or R1-2 (WF2+) - Body ground

Always

10 kΩ or higher

K14-23 (WF2-) or R1-1 (WF2-) - Body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK

22.

INSPECT REAR STEREO COMPONENT SPEAKER ASSEMBLY

(a) Remove the rear stereo component speaker assembly.

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; AUDIO / VIDEO: REAR PACKAGE TRAY SPEAKER: REMOVAL

(b) Inspect the rear stereo component speaker assembly.

Click here 2018 - 2024 MY Camry [06/2017 -        ]; AUDIO / VIDEO: REAR PACKAGE TRAY SPEAKER: INSPECTION

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPLACE REAR STEREO COMPONENT SPEAKER ASSEMBLY