Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014TH4
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 - 10/2020]
Title: AUDIO / VIDEO: RADIO RECEIVER: REMOVAL; 2018 - 2020 MY Camry [06/2017 - 10/2020]

REMOVAL

PROCEDURE

1. PRECAUTION (w/o Navigation System)

NOTICE:

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occurs:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly may not operate normally.

2. PRECAUTION (w/ Navigation System)

NOTICE:

  • When replacing the radio and display receiver assembly or navigation ECU, always replace it with a new one. If a radio and display receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly or navigation ECU may not operate normally.
  • After replacing the radio and display receiver assembly, if "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display, update the software of the navigation ECU.

3. REMOVE NO. 1 METER HOOD CLUSTER

Click here 2018 - 2019 MY Camry [06/2017 - 09/2019]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL+ 2020 MY Camry [09/2019 - 03/2020]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL+ 2020 - 2024 MY Camry [03/2020 -        ]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL+

4. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

Click here 2018 - 2019 MY Camry [06/2017 - 09/2019]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL+ 2020 MY Camry [09/2019 - 03/2020]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL+ 2020 - 2024 MY Camry [03/2020 -        ]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL+

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL+

6. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Click here 2018 - 2020 MY Camry [06/2017 - 10/2020]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL+

7. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for 7 Inch Display)

Click here 2018 - 2020 MY Camry [03/2017 - 10/2020]; HEATING / AIR CONDITIONING: AIR CONDITIONING PANEL: REMOVAL+

8. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 7 Inch Display)

(a) Release the tilt and telescopic lever and fully extend and lower the steering column assembly.

(b) Remove the 4 bolts.

(c) Disengage the 4 clips in the order shown in the illustration.

Place Hand Here

Remove in this Direction

(d) Disengage the 5 clips as shown in the illustration.

Place Hand Here

Remove in this Direction

(e) Disengage the 2 guides as shown in the illustration.

Remove in this Direction

-

-

(f) Disconnect each connector and remove the radio and display receiver assembly with bracket.

9. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 8 Inch Display)

(a) Release the tilt and telescopic lever and fully extend and lower the steering column assembly.

(b) Remove the 4 bolts.

(c) Disengage the 4 clips in the order shown in the illustration.

Place Hand Here

Remove in this Direction

(d) Disengage the 7 clips as shown in the illustration.

Place Hand Here

Remove in this Direction

(e) Disengage the 2 guides as shown in the illustration.

Remove in this Direction

-

-

(f) Disconnect each connector and remove the radio and display receiver assembly with bracket.

10. REMOVE TELLTALE LIGHT ASSEMBLY (for 7 Inch Display)

Click here 2018 - 2020 MY Camry [03/2017 - 10/2020]; THEFT DETERRENT / KEYLESS ENTRY: SECURITY INDICATOR LIGHT ASSEMBLY: REMOVAL+

11. REMOVE MULTI-MEDIA MODULE WIRE (for 8 Inch Display)

(a) Disconnect the connector.

(b) Disengage the claw to remove the multi-media module wire.

12. DISCONNECT NAVIGATION ECU WITH WIRE (w/ Navigation System)

(a) Disconnect the 2 connectors to disconnect the navigation ECU with wire.

13. REMOVE NO. 1 RADIO RECEIVER BRACKET

(a) w/o Navigation System:

(1) Remove the 3 screws and No. 1 radio receiver bracket.

(b) w/ Navigation System:

(1) Remove the 5 screws and No. 1 radio receiver bracket.

14. REMOVE NO. 2 RADIO RECEIVER BRACKET

(a) w/o Navigation System:

(1) Remove the 3 screws and No. 2 radio receiver bracket.

(b) w/ Navigation System:

(1) Remove the 5 screws and No. 2 radio receiver bracket.

15. REMOVE NAVIGATION ECU WITH WIRE (w/ Navigation System)

16. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY