| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014TGE |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - 10/2020] |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ECU: REMOVAL; 2018 - 2020 MY Camry [06/2017 - 10/2020] | ||
REMOVAL
PROCEDURE
1. PRECAUTION
NOTICE:
-
When replacing the radio and display receiver assembly or navigation ECU, always replace it with a new one. If a radio and display receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly or navigation ECU may not operate normally.
- After replacing the navigation ECU, if "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display, update the software of the radio and display receiver assembly.
2. REMOVE NO. 1 METER HOOD CLUSTER
Click here
![2018 - 2019 MY Camry [06/2017 - 09/2019]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL+](/t3Portal/stylegraphics/info.gif)
3. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
Click here
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
Click here
5. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
Click here
6. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET
Click here
7. REMOVE MULTI-MEDIA MODULE WIRE
Click here
8. REMOVE NO. 1 NAVIGATION WIRE
|
(a) Disconnect the 3 connectors to remove the No. 1 navigation wire. |
|
9. REMOVE NO. 1 RADIO RECEIVER BRACKET
Click here
10. REMOVE NO. 2 RADIO RECEIVER BRACKET
Click here
11. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY
12. REMOVE NAVIGATION ECU
|
|