| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014TG6 |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - 10/2020] |
| Title: LIGHTING (EXT): HEADLIGHT DIMMER SWITCH: INSPECTION; 2018 - 2020 MY Camry [06/2017 - 10/2020] | ||
INSPECTION
PROCEDURE
1. INSPECT TURN SIGNAL SWITCH
|
*a |
Component without harness connected (Turn Signal Switch) |
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Light Control Switch
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
2 (L_OFF) - 12 (EL) |
Light control switch in DRL OFF*1 or off*2 position |
Below 1 Ω |
|
10 (A) - 12 (EL) |
Light control switch in AUTO position |
Below 1 Ω |
|
14 (T) - 12 (EL) |
Light control switch in tail position |
Below 1 Ω |
|
5 (H) - 12 (EL) |
Light control switch in head position |
Below 1 Ω |
Dimmer Switch
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
6 (HF) - 12 (EL) |
Dimmer switch in high flash position |
Below 1 Ω |
|
1 (HU) - 12 (EL) |
Dimmer switch in high position |
Below 1 Ω |
Turn Signal Switch
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
9 (TR) - 12 (EL) |
Turn signal switch in neutral position |
10 kΩ or higher |
|
3 (TL) - 12 (EL) |
Turn signal switch in neutral position |
10 kΩ or higher |
|
9 (TR) - 12 (EL) |
Turn signal switch in right turn position |
Below 1 Ω |
|
9 (TR) - 12 (EL) |
Turn signal switch in full right turn position |
Below 1 Ω |
|
9 (TR) - 11 (CR) |
Turn signal switch in full right turn position |
Below 1 Ω |
|
11 (CR) - 12 (EL) |
Turn signal switch in full right turn position |
Below 1 Ω |
|
3 (TL) - 12 (EL) |
Turn signal switch in left turn position |
Below 1 Ω |
|
3 (TL) - 12 (EL) |
Turn signal switch in full left turn position |
Below 1 Ω |
|
3 (TL) - 11 (CR) |
Turn signal switch in full left turn position |
Below 1 Ω |
|
11 (CR) - 12 (EL) |
Turn signal switch in full left turn position |
Below 1 Ω |
- *1: w/ DRL OFF Switch
- *2: w/o DRL OFF Switch
HINT:
- The left turn or right turn condition indicates a condition in which the turn signal switch will return to the neutral position after releasing your hand from the turn signal switch (turn signal switch is operated approximately 7°).
- The full left turn or full right turn condition indicates a condition in which the turn signal switch will not return to the neutral position after releasing your hand from the turn signal switch (turn signal switch is operated 12°).
If the result is not as specified, replace the turn signal switch.
|
|