Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014TG3
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 -           ]
Title: LIGHTING (EXT): REAR LIGHT ASSEMBLY: INSPECTION; 2018 - 2024 MY Camry [06/2017 -        ]

INSPECTION

PROCEDURE

1. INSPECT REAR LIGHT ASSEMBLY LH (for TMMK Made LED Type Back-up Light)

*a

Component without harness connected

(Rear Light Assembly LH)

(a) Apply battery voltage to the rear light assembly LH and check that the lights illuminate.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 1 (B)

Battery negative (-) → Terminal 4 (E)

Taillight illuminates

Battery positive (+) → Terminal 2 (B)

Battery negative (-) → Terminal 4 (E)

Back-up light illuminates

If the result is not as specified, replace the rear light assembly LH.

2. INSPECT REAR LIGHT ASSEMBLY RH (for TMMK Made LED Type Back-up Light)

*a

Component without harness connected

(Rear Light Assembly RH)

(a) Apply battery voltage to the rear light assembly RH and check that the lights illuminate.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 1 (B)

Battery negative (-) → Terminal 4 (E)

Taillight illuminates

Battery positive (+) → Terminal 2 (B)

Battery negative (-) → Terminal 4 (E)

Back-up light illuminates

If the result is not as specified, replace the rear light assembly RH.