| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014TFU |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - 09/2019] |
| Title: LIGHTING (EXT): HEADLIGHT ASSEMBLY: INSPECTION; 2018 - 2019 MY Camry [06/2017 - 09/2019] | ||
INSPECTION
PROCEDURE
1. INSPECT HEADLIGHT UNIT ASSEMBLY LH (for TMC Made)
|
*a |
Component without harness connected (Headlight Unit Assembly LH) |
(a) Apply battery voltage to the headlight unit assembly LH and check that the Lo/Hi beam shade operates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 4 (SOL) Battery negative (-) → Terminal 1 (E) |
Operates normally |
If the result is not as specified, replace the headlight unit assembly LH.
(b) Apply battery voltage to the headlight unit assembly LH and check that the light illuminates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 3 (LO) Battery negative (-) → Terminal 1 (E) |
Lo/Hi beam headlight illuminates |
If the result is not as specified, replace the headlight unit assembly LH.
2. INSPECT HEADLIGHT ASSEMBLY LH (for TMMK Made Bulb Type Turn Signal Light)
|
*a |
Component without harness connected (Headlight Assembly LH) |
(a) Apply battery voltage to the headlight assembly LH and check that the Lo/Hi beam shade operates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 4 (SOL) Battery negative (-) → Terminal 1 (E) |
Operates normally |
If the result is not as specified, replace the headlight assembly LH.
(b) Apply battery voltage to the headlight assembly LH and check that the light illuminates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 3 (LO) Battery negative (-) → Terminal 1 (E) |
Lo/Hi beam headlight illuminates |
If the result is not as specified, replace the headlight assembly LH.
3. INSPECT HEADLIGHT ASSEMBLY LH (for TMMK Made LED Type Turn Signal Light)
|
*a |
Component without harness connected (Headlight Assembly LH) |
(a) Apply battery voltage to the headlight assembly LH and check that the Lo/Hi beam shade operates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 3 (SOL) Battery negative (-) → Terminal 8 (E) |
Operates normally |
If the result is not as specified, replace the headlight assembly LH.
(b) Apply battery voltage to the headlight assembly LH and check that the light illuminates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 4 (LO) Battery negative (-) → Terminal 8 (E) |
Lo/Hi beam headlight illuminates |
|
Battery positive (+) → Terminal 1 (B) Battery positive (+) → Terminal 5 (B) Battery negative (-) → Terminal 8 (E) |
Parking light/daytime running light illuminates |
|
Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 8 (E) |
Turn signal light illuminates |
|
Battery positive (+) → Terminal 6 (B) Battery negative (-) → Terminal 8 (E) |
Side marker light illuminates |
If the result is not as specified, replace the headlight assembly LH.
4. INSPECT HEADLIGHT UNIT ASSEMBLY RH (for TMC Made)
|
*a |
Component without harness connected (Headlight Unit Assembly RH) |
(a) Apply battery voltage to the headlight unit assembly RH and check that the Lo/Hi beam shade operates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 4 (SOL) Battery negative (-) → Terminal 1 (E) |
Operates normally |
If the result is not as specified, replace the headlight unit assembly RH.
(b) Apply battery voltage to the headlight unit assembly RH and check that the light illuminates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 3 (LO) Battery negative (-) → Terminal 1 (E) |
Lo/Hi beam headlight illuminates |
If the result is not as specified, replace the headlight unit assembly RH.
5. INSPECT HEADLIGHT ASSEMBLY RH (for TMMK Made Bulb Type Turn Signal Light)
|
*a |
Component without harness connected (Headlight Assembly RH) |
(a) Apply battery voltage to the headlight assembly RH and check that the Lo/Hi beam shade operates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 4 (SOL) Battery negative (-) → Terminal 1 (E) |
Operates normally |
If the result is not as specified, replace the headlight assembly RH.
(b) Apply battery voltage to the headlight assembly RH and check that the light illuminates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 3 (LO) Battery negative (-) → Terminal 1 (E) |
Lo/Hi beam headlight illuminates |
If the result is not as specified, replace the headlight assembly RH.
6. INSPECT HEADLIGHT ASSEMBLY RH (for TMMK Made LED Type Turn Signal Light)
|
*a |
Component without harness connected (Headlight Assembly RH) |
(a) Apply battery voltage to the headlight assembly RH and check that the Lo/Hi beam shade operates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 3 (SOL) Battery negative (-) → Terminal 8 (E) |
Operates normally |
If the result is not as specified, replace the headlight assembly RH.
(b) Apply battery voltage to the headlight assembly RH and check that the light illuminates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 4 (LO) Battery negative (-) → Terminal 8 (E) |
Lo/Hi beam headlight illuminates |
|
Battery positive (+) → Terminal 1 (B) Battery positive (+) → Terminal 5 (B) Battery negative (-) → Terminal 8 (E) |
Parking light/daytime running light illuminates |
|
Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 8 (E) |
Turn signal light illuminates |
|
Battery positive (+) → Terminal 6 (B) Battery negative (-) → Terminal 8 (E) |
Side marker light illuminates |
If the result is not as specified, replace the headlight assembly RH.
|
|