| Open or short in stop light switch circuit | Cruise Control Malfunction Visit Your Dealer | Illuminates | Sounds | Dynamic radar cruise control system is turned off and back on again using the cruise control main switch. | 
                        
                           | Malfunction in SFI system | - | Illuminates | - | Dynamic radar cruise control system is turned off and back on again using the cruise control main switch. | 
                        
                           | If either of the following conditions occurs, the ECM cancels control of vehicle speed by the dynamic radar cruise control system (stored vehicle speed is maintained): 
                                 
                                    
Vehicle speed is less than approximately 40 km/h (25 mph) while driving with the dynamic radar cruise control system controlling vehicle speed
A preceding vehicle is not detected when follow-up control is being performed at a vehicle speed of approximately 40 km/h (25 mph) or less*
 | - | Does not illuminate | Sounds twice | +RES switch is pushed. | 
                        
                           | 
                                 
                                    
Malfunction in the millimeter wave radar sensor assembly
Beam axis of millimeter wave radar sensor assembly misaligned
Problem with stop light switch input circuit
Problem with cruise control main switch cancel circuit
 | Cruise Control Malfunction Visit Your Dealer | Illuminates | Sounds | Ignition switch is turned off and back to ON again. | 
                        
                           | If the following condition occurs, the ECM cancels control of vehicle speed by the dynamic radar cruise control system (stored vehicle speed is maintained): 
                                 
                                    
Millimeter wave radar sensor assembly becomes dirty
 | Radar Cruise Control Unavailable Clean Sensor | Illuminates | Sounds | The condition returns to normal (the resume function can be operated after fail-safe is deactivated). | 
                        
                           | If any of the conditions listed below occurs, the ECM cancels control of vehicle speed by the dynamic radar cruise control system (stored vehicle speed is maintained): 
                                 
                                    
Millimeter wave radar sensor assembly sensitivity reduced because of bad weather such as rain, fog, snow, or sandstorm
Brake control by the dynamic radar cruise control system is temporarily unavailable
The beam axis of the millimeter wave radar sensor assembly is being aligned
The forward recognition camera is temporarily unavailable
A system check is being performed after the engine has started
 | Radar Cruise Control Unavailable | Illuminates | Sounds | The conditions return to normal (the resume function can be operated after fail-safe is deactivated). | 
                        
                           | 
                                 
                                    
Vehicle stability control system operates while driving with cruise control system controlling vehicle speed
TRAC system operates for a certain period of time while driving with cruise control system controlling vehicle speed.
TRAC is turned off
VSC is turned off
Drive start control is performed
Intelligent clearance sonar detects an object (w/ Intelligent Clearance Sonar System)*
Parking brake is applied (w/o Electric Parking Brake System)*
Electric parking brake is applied (w/ Electric Parking Brake System)*
 | - | Does not illuminate | - | +RES switch is pushed. | 
                        
                           | If any of the following conditions occur while the vehicle stopped, the ECM cancels control of vehicle speed by the dynamic radar cruise control system*: 
                                 
                                    
Open or short in stop light switch circuit
Malfunction in the millimeter wave radar sensor assembly
Beam axis of millimeter wave radar sensor assembly misaligned
Problem with stop light switch input circuit
Problem with cruise control main switch cancel circuit
Millimeter wave radar sensor assembly sensitivity reduced because of bad weather such as rain, fog, snow, or sandstorm
Millimeter wave radar sensor assembly becomes dirty
Brake control by the dynamic radar cruise control system is temporarily unavailable
The beam axis of the millimeter wave radar sensor assembly is being aligned
The forward recognition camera is temporarily unavailable
A system check is being performed after the engine has started
 | Cruise Control Fault Press Brake to Deactivate Visit Your Dealer | Illuminates | 4 beeps are heard | The conditions return to normal (the resume function can be operated after fail-safe is deactivated). | 
                        
                           | If any of the following conditions occur while the vehicle is stopped, the ECM cancels control of vehicle speed by the dynamic radar cruise control system*: 
                                 
                                    
The driver seat belt is unfastened
The driver door is opened
The vehicle is parked for a long period of time
The vehicle is stopped on a steep hill
A preceding vehicle is not detected
 | Radar Cruise Control Unavailable  Press Brake to Resume Driving | Does not illuminate | - | The conditions return to normal (the resume function can be operated after fail-safe is deactivated). |