Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014T84
Model Year Start: 2018 Model: Camry Prod Date Range: [06/2017 -           ]
Title: PARKING BRAKE: ELECTRIC PARKING BRAKE ACTUATOR: REMOVAL; 2018 - 2024 MY Camry [06/2017 -        ]

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. PRECAUTION

Click here 2018 - 2024 MY Camry [06/2017 -        ]; PARKING BRAKE: PARKING BRAKE SYSTEM(w/ Electric Parking Brake System): PRECAUTION

2. RELEASE PARKING BRAKE

(a) Move the shift lever to P.

(b) Turn the engine switch on (IG).

(c) Operate the electric parking brake switch assembly to release the parking brake.

HINT:

If the parking brake cannot be released:

Click here 2018 - 2019 MY Camry [06/2017 - 09/2019]; PARKING BRAKE: FORCED RELEASE: OPERATION METHOD 2020 - 2024 MY Camry [09/2019 -        ]; PARKING BRAKE: FORCED RELEASE: OPERATION METHOD

(d) Turn the engine switch off.

3. REMOVE REAR WHEEL

Click here 2018 - 2024 MY Camry [06/2017 -        ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL+

4. DISCONNECT NO. 2 PARKING BRAKE WIRE ASSEMBLY

(a) Disconnect the No. 2 parking brake wire assembly connector from the parking brake actuator assembly.

NOTICE:

  • Remove any dirt or foreign matter on and around the No. 2 parking brake wire assembly connector before performing this step.
  • Do not allow water, oil or dirt to enter the No. 2 parking brake wire assembly connector.

5. REMOVE PARKING BRAKE ACTUATOR ASSEMBLY

(a) Using a 5 mm hexagon socket wrench, remove the 2 bolts and parking brake actuator assembly from the rear disc brake cylinder assembly.

NOTICE:

  • Check for brake fluid leaks on the back side of the rear disc brake cylinder assembly.
  • If there are any brake fluid leaks, replace the rear disc brake cylinder assembly.

(b) Remove the O-ring from the rear disc brake cylinder assembly.