| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014T24 |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - 10/2020] |
| Title: HEATING / AIR CONDITIONING: AMBIENT TEMPERATURE SENSOR: REMOVAL; 2018 - 2020 MY Camry [06/2017 - 10/2020] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during thermistor assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Front bumper assembly (w/ Panoramic view monitor system) |
Front television camera view adjustment |
Panoramic view monitor system |
|
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY
Click here
![2018 - 2020 MY Camry [06/2017 - 10/2020]; EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE RH
|
(a) Disengage the 2 claws to remove the front radiator side air guide plate RH. |
|
3. REMOVE THERMISTOR ASSEMBLY
|
(a) Disengage the clamp. |
|
(b) Disconnect the connector to remove the thermistor assembly.
|
|