| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014T0M |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [06/2017 - ] |
| Title: HEATING / AIR CONDITIONING: COMPRESSOR (for 2GR-FKS): INSPECTION; 2018 - 2024 MY Camry [06/2017 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT MAGNET CLUTCH ASSEMBLY
|
*a |
Component without harness connected (Magnet Clutch Assembly) |
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
1 (SSR+) - 2 (SSR-) |
20°C (68°F) |
160 to 320 Ω |
2. INSPECT COOLER COMPRESSOR ASSEMBLY (COMPRESSOR SOLENOID)
|
*a |
Component without harness connected (Cooler Compressor Assembly (Compressor Solenoid)) |
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
1 (SOL-) - 2 (SOL+) |
25°C (77°F) |
10.1 to 11.1 Ω |
3. INSPECT MAGNET CLUTCH ASSEMBLY
|
*a |
Component without harness connected (Magnetic Clutch Assembly) |
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
3 (MG+) - Cooler compressor assembly body |
20°C (68°F) |
3.8 to 4.2 Ω |
(b) Connect a positive (+) lead from the battery to connector terminal 3 (MG+) and a negative (-) lead to the cooler compressor assembly and check that magnetic clutch assembly operates.
Standard:
|
Tester Connection |
Specified Condition |
|---|---|
|
Battery positive (+) → 3 (MG+) Battery negative (-) → Cooler compressor assembly body |
Operating sound is heard and magnetic clutch hub and rotor lock |
|
|