HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Manual Air Conditioning System): DATA LIST / ACTIVE TEST; 2018 - 2024 MY Camry [03/2017

Last Modified: 11-20-2023	6.11:8.1.0	Doc ID: RM10000000146BD
Model Year Start: 2018	Model: Camry	Prod Date Range: [03/2017 - ]
Title: HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Manual Air Conditioning System): DATA LIST / ACTIVE TEST; 2018 - 2024 MY Camry [03/2017 - ]

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(d) Enter the following menus: Body Electrical / Air Conditioner / Data List.

(e) Read the Data List according to the display on the Techstream.

Body Electrical > Air Conditioner > Data List

Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
Ambient Temp Sensor	Thermistor assembly	Min.: -23.30°C (-9.94°F) Max.: 65.95°C (150.71°F)	Actual ambient temperature displayed	-
Adjusted Ambient Temp	Adjusted ambient temperature	Min.: -30.80°C (-23.44°F) Max.: 50.80°C (123.44°F)	-	-
Evaporator Fin Thermistor	No. 1 cooler thermistor	Min.: -29.70°C (-21.46°F) Max.: 59.55°C (139.19°F)	Actual evaporator temperature displayed	-
Evaporator Target Temp	Evaporator target temperature	Min.: -327.68°C (-557.82°F) Max.: 327.67°C (621.81°F)	Evaporator target temperature displayed	-
Engine Coolant Temp	Engine coolant temperature sensor	Min.: 1.30°C (34.34°F) Max.: 90.55°C (194.99°F)	Actual engine coolant temperature displayed	-
Blower Motor Speed Level	Blower motor speed level	Min.: 0 Max.: 31	Displayed speed level increases in range between 0 and 31 as blower motor speed increases	-
Regulator Pressure Sensor	Air conditioner pressure sensor	Min.: -456.68 kPaG Max.: 3294.37 kPaG	Actual refrigerant pressure displayed	-
Regulator Control Current	Solenoid valve control current	Min.: 0 A Max.: 0.997 A	Value changes between 0 A and 0.997 A in accordance with solenoid valve operation	-
Air Mix Servo Targ Pulse(D)	No. 1 air conditioning radiator damper servo sub-assembly (air mix) target pulse	Min.: 128 Max.: 383	MAX COLD: 257 (pulse) MAX HOT: 165 (pulse)	-
Air Mix Servo Actual Pulse(D)	No. 1 air conditioning radiator damper servo sub-assembly (air mix) actual pulse	Min.: 128 Max.: 383	MAX COLD: 257 (pulse) MAX HOT: 165 (pulse)	-
Air Outlet Servo Pulse (D)	No. 1 air conditioning radiator damper servo sub-assembly (mode) target pulse	Min.: 128 Max.: 383	FACE-R: 241 (pulse) FACE: 256 (pulse) FACE1: 256 (pulse) FACE2: 256 (pulse) B/L: 267 (pulse) B/L2: 267 (pulse) FOOT-R: 297 (pulse) FOOT: 297 (pulse) FOOT-D: 305 (pulse) FOOT-0: 288 (pulse) F/D: 320 (pulse) DEF-FOOT: 339 (pulse) DEF or SHUT: 348 (pulse)	-
Air Outlet Servo Actu Pulse(D)	No. 1 air conditioning radiator damper servo sub-assembly (mode) actual pulse	Min.: 128 Max.: 383	FACE-R: 241 (pulse) FACE: 256 (pulse) FACE1: 256 (pulse) FACE2: 256 (pulse) B/L: 267 (pulse) B/L2: 267 (pulse) FOOT-R: 297 (pulse) FOOT: 297 (pulse) FOOT-D: 305 (pulse) FOOT-0: 288 (pulse) F/D: 320 (pulse) DEF-FOOT: 339 (pulse) DEF or SHUT: 348 (pulse)	-
Air Inlet Damper Targ Pulse	No. 1 blower damper servo sub-assembly target pulse	Min.: 128 Max.: 383	Recirculation: 256 (pulse) Fresh: 220 (pulse)	-
Air Inlet Damper Actual Pulse	No. 1 blower damper servo sub-assembly actual pulse	Min.: 128 Max.: 383	Recirculation: 256 (pulse) Fresh: 220 (pulse)	-
Refrigerant Shortage Check	Refrigerant shortage check	ON or OFF	Customized value displayed	-
Fan speed increment control	Fan speed increment control	Slow, Normal or Fast	Customized value displayed	-
Ambient Temperature Shift	Ambient temperature shift	3C decr, 2C decr, 1C decr, Normal, 1C incr, 2C incr or 3C incr	Customized value displayed	-
A/C Cutoff Signal	A/C control cutoff signal	OFF or ON	The ECM sends the air conditioning control cutoff signal displayed	-
Refrigerant Gas Type	Refrigerant gas type	R134a or R1234yf	Refrigerant gas type displayed	-
Outside Air Mode Auto Switch Function	Outside air mode auto switch function	ON or OFF	Customized value displayed	-
Number of Trouble Codes	Number of trouble codes	Min.: 0 Max.: 255	Number of DTCs displayed	-
Refrigerant High Pressure History	Refrigerant high pressure history	Min.: 0 Max.: 255	Number of times refrigerant high pressure history stored displayed	*

*: Refer to the following procedure to clear the refrigerant high pressure history.
Click here

Powertrain > Engine > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Coolant Temperature

Engine coolant temperature

Min.: -40°C (-40°F)

Max.: 140°C (284°F)

75 to 100°C (167 to 212°F): After warming up

This is the engine coolant temperature.

HINT:

After warming up the engine, the engine coolant temperature will be 75 to 100°C (167 to 212°F).
After a long soak, the engine coolant temperature, intake air temperature and ambient air temperature will be approximately equal.
If the value is -40°C (-40°F), or higher than 135°C (275°F), the sensor circuit is open or shorted.
Check if the engine overheats if the value indicated is higher than 135°C (275°F).

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(d) Enter the following menus: Body Electrical / Air Conditioner / Active Test.

(e) Perform the Active Test according to the display on the Techstream.

Body Electrical > Air Conditioner > Active Test

Tester Display	Measurement Item	Control Range	Diagnostic Note
Blower Motor	Blower motor with fan sub-assembly	Min.: 0 Max.: 31	-
Magnetic Clutch Relay	Air conditioning system operation	OFF or ON	-
Defogger Relay (Rear)	Rear window defogger	OFF or ON	-
Air Mix Servo Targ Pulse(D)	No. 1 air conditioning radiator damper servo sub-assembly (air mix) pulse	Min.: 128 Max.: 383	Operates between 165 to 257 pulses
Air Outlet Servo Pulse (D)	No. 1 air conditioning radiator damper servo sub-assembly (mode) pulse	Min.: 128 Max.: 383	Operates between 241 to 348 pulses
Air Inlet Damper Targ Pulse	No. 1 blower damper servo sub-assembly pulse	Min.: 128 Max.: 383	Operates between 220 to 256 pulses