Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM1000000013QKO |
Model Year Start: 2018 |
Model: Camry |
Prod Date Range: [03/2017 -
] |
Title: DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: All Doors LOCK/UNLOCK Functions do not Operate Via Master Switch; 2018 - 2024 MY Camry [03/2017 - ] |
All Doors LOCK/UNLOCK Functions do not Operate Via Master Switch
|
DESCRIPTION
The main body ECU (multiplex network body ECU) receives switch signals from the multiplex network master switch assembly and driver door key cylinder lock or unlock switch signals from the front door lock with motor assembly LH. The main body ECU (multiplex network body ECU) activates the door lock motor on each door according to these signals.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
-
The power door lock control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power door lock control system after confirming that the communication systems are functioning properly.
Click here
-
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.*
Click here
*: w/ Smart Key System
PROCEDURE
1.
|
CHECK FOR DTC (LIN COMMUNICATION SYSTEM)
|
(a) Clear the DTCs.
Body Electrical > Main Body > Clear DTCs
(b) Recheck for DTCs.
Body Electrical > Main Body > Trouble Codes
OK:
DTC B1206 is not output.
OK
|
|
|
2.
|
REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY
|
(a) Replace the multiplex network master switch assembly.
Click here
NEXT
|
|
|
3.
|
CHECK DOOR LOCK OPERATION
|
(a) Check that all doors can be locked and unlocked by the multiplex network master switch assembly.
Click here
OK:
All doors can be locked and unlocked by the multiplex network master switch assembly.
OK |
|
END (MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WAS DEFECTIVE)
|
|