Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000013QIG
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 - 06/2017]
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: C1610; Camera ECU Malfunction; 2018 MY Camry [03/2017 - 06/2017]

DTC

C1610

Camera ECU Malfunction

DESCRIPTION

This DTC is stored when a malfunction occurs in the parking assist monitor system.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1610

Camera ECU Malfunction

Malfunction occurs in the parking assist monitor system
  • Parking assist monitor system
  • Radio and display receiver assembly

CAUTION / NOTICE / HINT

NOTICE:

  • Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.

    Click here 2018 MY Camry [03/2017 - 06/2017]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: PRECAUTION

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly may not operate normally.

PROCEDURE

1.

CHECK DTC (PARKING ASSIST MONITOR SYSTEM)

(a) Clear the DTCs.

Chassis > Parking Assist Camera > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Chassis > Parking Assist Camera > Trouble Codes

OK:

No DTCs are output.

NG

GO TO PARKING ASSIST MONITOR SYSTEM

OK

2.

CHECK DTC (AUDIO AND VISUAL SYSTEM)

(a) Clear the DTCs.

Body Electrical > Navigation System > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Body Electrical > Navigation System > Trouble Codes

OK:

No DTCs are output.

OK

END
NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY