| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000013HRK |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 06/2017] |
| Title: A25A-FKS (INTAKE / EXHAUST): EXHAUST PIPE: INSTALLATION; 2018 MY Camry [03/2017 - 06/2017] | ||
INSTALLATION
PROCEDURE
1. INSTALL TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY (w/ Tail Exhaust Pipe Baffle)
HINT:
- Perform this procedure only when replacement of the tail exhaust pipe baffle sub assembly is necessary.
- If the tail exhaust pipe baffle sub assembly is removed, replace it with a new one.
|
(a) Align the concave area of the baffle with the guide line of the tail exhaust pipe assembly as shown in the illustration. |
|
(b) Using a plastic hammer, uniformly tap a new tail exhaust pipe baffle sub-assembly onto the tail exhaust pipe assembly.
2. INSTALL FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)
(a) Install a new gasket to the front exhaust pipe assembly (TWC: Rear Catalyst).
(b) Connect the front exhaust pipe assembly (TWC: Rear Catalyst) to the 2 exhaust pipe supports.
(c) Install the front exhaust pipe assembly (TWC: Rear Catalyst) to the exhaust manifold (TWC: Front Catalyst) with 2 new nuts.
Torque:
43 N·m {438 kgf·cm, 32 ft·lbf}
3. INSTALL AIR FUEL RATIO SENSOR (for Sensor 2)
Click here
![2018 - 2020 MY Camry [03/2017 - 03/2020]; A25A-FKS (ENGINE CONTROL): AIR FUEL RATIO SENSOR (for Sensor 2): INSTALLATION](/t3Portal/stylegraphics/info.gif)
4. INSTALL CENTER EXHAUST PIPE ASSEMBLY
(a) Install a new gasket to the front exhaust pipe assembly (TWC: Rear Catalyst).
(b) Connect the center exhaust pipe assembly to the exhaust pipe support.
(c) Install the center exhaust pipe assembly to the front exhaust pipe assembly (TWC: Rear Catalyst) with 2 new bolts.
Torque:
43 N·m {438 kgf·cm, 32 ft·lbf}
5. INSTALL TAIL EXHAUST PIPE ASSEMBLY
(a) Install a new gasket to the center exhaust pipe assembly.
(b) Connect the tail exhaust pipe assembly to the 2 exhaust pipe supports.
(c) Install the tail exhaust pipe assembly to the center exhaust pipe assembly with 2 new bolts.
Torque:
43 N·m {438 kgf·cm, 32 ft·lbf}
6. INSTALL CENTER FLOOR CROSSMEMBER BRACE
(a) Install the center floor crossmember brace to the vehicle body with the 4 bolts.
Torque:
15 N·m {153 kgf·cm, 11 ft·lbf}
7. INSTALL FRONT CENTER FLOOR BRACE
(a) Install the front center floor brace to the vehicle body with the 4 bolts.
Torque:
15 N·m {153 kgf·cm, 11 ft·lbf}
8. INSTALL FRONT FLOOR COVER LH
|
(a) Install the front floor cover LH with the grommet (B) and 6 clips (C). |
|
(b) Install the 3 bolts and 4 clips (A).
Torque:
Bolt :
7.5 N·m {76 kgf·cm, 66 in·lbf}
9. INSTALL FRONT FLOOR COVER RH
|
(a) Install the front floor cover RH with the grommet (B) and 6 clips (C). |
|
(b) Install the 3 bolts and 4 clips (A).
Torque:
Bolt :
7.5 N·m {76 kgf·cm, 66 in·lbf}
10. INSPECT FOR EXHAUST GAS LEAK
If gas is leaking, tighten the areas necessary to stop the leak. Replace damaged parts as necessary.
(a) Perform Inspection After Repair after repairing an exhaust gas leak.
Click here
|
|