Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM10000000138LJ |
Model Year Start: 2018 |
Model: Camry |
Prod Date Range: [03/2017 -
] |
Title: MAINTENANCE: A25A-FKS SPARK PLUG: REMOVAL; 2018 - 2024 MY Camry [03/2017 - ] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during spark plug removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
-
Replacement of ignition coil assembly
-
Replacement of spark plug
|
Inspection after repair
|
-
Poor idle, etc.
-
Engine start function, etc.
|
|
NOTICE:
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
PROCEDURE
1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
Click here
2. REMOVE IGNITION COIL ASSEMBLY
Click here
3. REMOVE SPARK PLUG
(a) Remove the 4 spark plugs from the cylinder head sub-assembly.
NOTICE:
If a spark plug has been struck or dropped, replace it.
HINT:
Arrange the removed parts in the correct order.
|
|
|