| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM10000000136SZ |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 09/2019] |
| Title: A25A-FKS (LUBRICATION): OIL PRESSURE SENSOR: INSTALLATION; 2018 - 2019 MY Camry [03/2017 - 09/2019] | ||
INSTALLATION
PROCEDURE
1. INSTALL OIL PRESSURE SENSOR (OIL PRESSURE SENDER GAUGE ASSEMBLY)
|
(a) Apply adhesive to 2 or 3 threads of the oil pressure sensor (oil pressure sender gauge assembly). Adhesive: Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent NOTICE:
|
|
(b) Using a 27 mm deep socket wrench, install the oil pressure sensor (oil pressure sender gauge assembly) to the cylinder block sub-assembly.
Torque:
15 N·m {153 kgf·cm, 11 ft·lbf}
(c) Connect the oil pressure sensor (oil pressure sender gauge assembly) connector.
2. INSPECT FOR ENGINE OIL LEAK
Click here
![2018 MY Camry [03/2017 - 06/2017]; MAINTENANCE: A25A-FKS OIL AND OIL FILTER: REPLACEMENT+](/t3Portal/stylegraphics/info.gif)
3. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY
Click here
4. INSTALL NO. 1 ENGINE UNDER COVER
Click here
5. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH
Click here
6. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
Click here
|
|