Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM10000000136D9
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 - 10/2020]
Title: A25A-FKS (FUEL): FUEL INJECTOR (for Port Injection): INSTALLATION; 2018 - 2020 MY Camry [03/2017 - 10/2020]

INSTALLATION

CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here 2018 MY Camry [03/2017 - 06/2017]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION 2018 - 2019 MY Camry [06/2017 - 09/2019]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION 2020 MY Camry [09/2019 - 03/2020]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION 2020 - 2024 MY Camry [03/2020 -        ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION

PROCEDURE

1. INSTALL PORT FUEL INJECTOR ASSEMBLY

HINT:

Perform "Inspection After Repair" after replacing a port fuel injector assembly.

Click here 2018 - 2019 MY Camry [03/2017 - 09/2019]; A25A-FKS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2020 MY Camry [09/2019 - 03/2020]; A25A-FKS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2020 - 2024 MY Camry [03/2020 -        ]; A25A-FKS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION

(a) Apply a light coat of spindle oil or gasoline to 4 new O-rings, and install 1 to each port fuel injector assembly.

NOTICE:

Check that there is no damage or foreign matter on the groove of the port fuel injector assembly when installing the O-ring to each port fuel injector assembly.

(b) Install the 4 port fuel injector assemblies to the fuel delivery pipe with sensor sub-assembly.

NOTICE:

  • Make sure that the port fuel injector assembly is located within the stopper as shown in the illustration.
  • Check that the port fuel injector assembly installation holes of the fuel delivery pipe with sensor sub-assembly are not damaged and are free of foreign matter.
  • Make sure that the O-ring is not damaged, twisted or moved out of place when installing the port fuel injector assembly.

*a

Stopper

*b

Claw

2. INSTALL NO. 5 ENGINE WIRE

(a) Engage the 2 clamps to install the No. 5 engine wire to the fuel delivery pipe with sensor sub-assembly.

(b) Connect the 4 port fuel injector assembly connectors and fuel pressure sensor connector.

3. INSTALL INJECTOR VIBRATION INSULATOR

(a) Install 4 new injector vibration insulators to the cylinder head sub-assembly.

4. INSTALL NO. 1 DELIVERY PIPE SPACER

(a) Install the 2 No. 1 delivery pipe spacers to the cylinder head sub-assembly.

5. INSTALL FUEL DELIVERY PIPE WITH SENSOR SUB-ASSEMBLY

(a) Place the fuel delivery pipe with sensor sub-assembly with the 4 port fuel injector assemblies onto the cylinder head sub-assembly.

NOTICE:

Be careful not to drop the port fuel injector assemblies when installing the fuel delivery pipe with sensor sub-assembly.

(b) Install the fuel delivery pipe with sensor sub-assembly with the port fuel injector assemblies with the 2 bolts.

Torque:

28.5 N·m {291 kgf·cm, 21 ft·lbf}

6. CONNECT FUEL TUBE SUB-ASSEMBLY

(a) Connect the fuel tube sub-assembly to the fuel delivery pipe with sensor sub-assembly.

Click here 2018 MY Camry [03/2017 - 06/2017]; A25A-FKS (FUEL): FUEL SYSTEM: PRECAUTION 2018 - 2019 MY Camry [06/2017 - 09/2019]; A25A-FKS (FUEL): FUEL SYSTEM: PRECAUTION 2020 MY Camry [09/2019 - 03/2020]; A25A-FKS (FUEL): FUEL SYSTEM: PRECAUTION 2020 - 2024 MY Camry [03/2020 -        ]; A25A-FKS (FUEL): FUEL SYSTEM: PRECAUTION

(b) Install the fuel pipe clamp to the fuel tube connector.

7. TEMPORARILY INSTALL NO. 1 FUEL PIPE SUB-ASSEMBLY

Click here 2018 - 2020 MY Camry [03/2017 - 03/2020]; A25A-FKS (FUEL): FUEL PUMP (for High Pressure): INSTALLATION+ 2020 MY Camry [03/2020 - 10/2020]; A25A-FKS (FUEL): FUEL PUMP (for High Pressure): INSTALLATION+

8. INSTALL FUEL PUMP ASSEMBLY

Click here 2018 - 2020 MY Camry [03/2017 - 03/2020]; A25A-FKS (FUEL): FUEL PUMP (for High Pressure): INSTALLATION+ 2020 MY Camry [03/2020 - 10/2020]; A25A-FKS (FUEL): FUEL PUMP (for High Pressure): INSTALLATION+

9. INSTALL NO. 1 FUEL PIPE SUB-ASSEMBLY

Click here 2018 - 2020 MY Camry [03/2017 - 03/2020]; A25A-FKS (FUEL): FUEL PUMP (for High Pressure): INSTALLATION+ 2020 MY Camry [03/2020 - 10/2020]; A25A-FKS (FUEL): FUEL PUMP (for High Pressure): INSTALLATION+

10. INSTALL INTAKE MANIFOLD

Click here 2018 - 2020 MY Camry [03/2017 - 10/2020]; A25A-FKS (INTAKE / EXHAUST): INTAKE MANIFOLD: INSTALLATION

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here 2018 MY Camry [03/2017 - 06/2017]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2018 MY Camry [06/2017 - 08/2018]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2019 MY Camry [08/2018 - 09/2019]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2020 MY Camry [09/2019 - 03/2020]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2020 MY Camry [03/2020 - 10/2020]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION

12. INSPECT FOR FUEL LEAK

Click here 2018 - 2024 MY Camry [03/2017 -        ]; A25A-FKS (FUEL): FUEL SYSTEM: ON-VEHICLE INSPECTION+

13. PERFORM INITIALIZATION

(a) Perform "Inspection After Repair" after replacing a port fuel injector assembly.

Click here 2018 - 2019 MY Camry [03/2017 - 09/2019]; A25A-FKS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2020 MY Camry [09/2019 - 03/2020]; A25A-FKS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2020 - 2024 MY Camry [03/2020 -        ]; A25A-FKS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION